1) I have both IDE channels disabled from BIOS however they r both being probed and used. Should this happen? 2) The dual SCSI channel controller is also probed but with some strange PCI error. 3) sio3 is configure BUT irq 9 not in bitmap of probed irqs 0???
Motherboard is a dual PIII Gigabyte GA-6BXDU with dual SCSI on board and seems to be working fine so far without any problems other than these messages. R these normal? Parts of dmesg follow: FreeBSD 4.7-STABLE #0: Tue Oct 29 02:30:34 EET 2002 ... atapci0: <Intel PIIX4 ATA33 controller> at device 7.1 on pci0 atapci0: ATA channel disabled by BIOS ... ahc0: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0xdc00-0xdcff mem 0xe3100000-0xe3100fff irq 17 at device 12.0 on pci0 aic7896/97: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs ahc1: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0xe000-0xe0ff mem 0xe3102000-0xe3102fff irq 17 at device 12.1 on pci0 aic7896/97: Ultra2 Wide Channel B, SCSI Id=7, 32/253 SCBs ... ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ata1 at port 0x170-0x177,0x376 irq 15 on isa0 ... sio3: configured irq 9 not in bitmap of probed irqs 0 sio3 at port 0x2e8-0x2ef irq 9 flags 0x20000 on isa0 sio3: type ST16650A ... ahc0: PCI error Interrupt at seqaddr = 0x3 ahc0: Signaled a Target Abort ahc1: PCI error Interrupt at seqaddr = 0x3 ahc1: Signaled a Target Abort ... To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-stable" in the body of the message
