I'm running 4.7-stable and ..
imb@mbutler# ifconfig fxp0
fxp0: flags=9843<UP,BROADCAST,RUNNING,SIMPLEX,LINK0,MULTICAST> mtu 1500
inet 66.37.xxx.yyy netmask 0xfffffff8 broadcast 66.37.vvv.www
ether 00:50:8b:0d:7f:64
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
.. but ..
imb@mbutler# ifconfig fxp0 mediaopt full-duplex
ifconfig: SIOCSIFMEDIA: Device not configured
Hard-setting speed works but not duplex.
'pciconf -v -l' says ..
fxp0@pci0:18:0: class=0x020000 card=0xb0d70e11 chip=0x12298086 rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = '82557/8/9 EtherExpress PRO/100(B) Ethernet Adapter'
class = network
subclass = ethernet
.. what gives?
Also, I assume more cosmetic, setting 'link0' yields the message:
Nov 2 09:54:14 mbutler /kernel: fxp0: Microcode loaded, int_delay: 1000 usec
bundle_max: 0
Yet ..
imb@mbutler# sysctl hw.fxp0.bundle_max
hw.fxp0.bundle_max: 6
Michael Butler CISSP
Managed Security Services
Cable and Wireless
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-stable" in the body of the message
