* Andre Albsmeier <[EMAIL PROTECTED]> [20030306 15:32]: > On Sat, 01-Mar-2003 at 10:49:34 +0100, Francesco Casadei wrote: > (I assume the cabling/termination has been checked already.) Yep, I also run the controler's BIOS drive check on the drives.
> I had bus problems with my DNES until I upgraded the firmware to: > > da2: <IBM DNES-318350W SAH0> Fixed Direct Access SCSI-3 device > > In general, I have often seen bus problems when a lot of different > devices are hanging on the same SCSI bus and some drives are being > hit really hard. That could be my case: 2 drives 1 cdrw, cd burning and compiling (if that qualifies as 'really hard'. > I have written a program to upgrade the firmware on IBM and Plextor > (and some other devices) under FreeBSD in case you are interested... Does it work for Seagate drives? (20:29:52 <~>) 0 $ camcontrol devlist <SEAGATE ST318438LW 0003> at scbus0 target 0 lun 0 (pass0,da0) <YAMAHA CRW2100S 1.0G> at scbus0 target 2 lun 0 (pass1,cd0) <IBM DNES-309170W SA30> at scbus0 target 6 lun 0 (pass2,da1) qvb -- pica To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-stable" in the body of the message