Am Samstag, 7. Juni 2003 05:19 schrieb Doug White:
> On Fri, 6 Jun 2003, Martin Gumucio wrote:
> > When i plug it in the following appears in messages
> >
> > Jun  6 12:07:25 rollo /kernel: umass0: Sony USB Storage
> > Media, rev 1.10/2.00, addr 4
> > Jun  6 12:07:25 rollo /kernel:
> > umass0: Get Max Lun not supported (SHORT_XFER)

My USB pen drive works well, if plugged in before booting
the kernel:

da0 at umass-sim0 bus 0 target 0 lun 0
da0: < USB DISK 2.08> Removable Direct Access SCSI-0 device
da0: 650KB/s transfers
da0: 62MB (128000 512 byte sectors: 64H 32S/T 62C)

But after unplugging and plugging it in after booting,
I get this on accessing the da0 device with mount or
directly with dd:

umass0: BBB reset failed, TIMEOUT
umass0: BBB bulk-in clear stall failed, TIMEOUT
umass0: BBB bulk-out clear stall failed, TIMEOUT
umass0: BBB reset failed, TIMEOUT
umass0: BBB bulk-in clear stall failed, TIMEOUT
umass0: BBB bulk-out clear stall failed, TIMEOUT
umass0: BBB reset failed, TIMEOUT
umass0: BBB bulk-in clear stall failed, TIMEOUT
umass0: BBB bulk-out clear stall failed, TIMEOUT
da0: reading primary partition table: error reading fsbn 0
umass0: BBB reset failed, TIMEOUT
umass0: BBB bulk-in clear stall failed, TIMEOUT
umass0: BBB bulk-out clear stall failed, TIMEOUT
(da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status 
== 0x0
umass0: BBB reset failed, TIMEOUT
umass0: BBB bulk-in clear stall failed, TIMEOUT
umass0: BBB bulk-out clear stall failed, TIMEOUT

this continues until unplugging the USB pen drive

-- 
/\/\ichael Ranner

[EMAIL PROTECTED] - [EMAIL PROTECTED] - [EMAIL PROTECTED]
----------------------------------------------------------------------
JAWA Management Software GmbH - http://www.jawa.at/
  Liebenauer Hauptstrasse 2oo - A-8041 Graz
        Tel +43 316 403274 21 - Fax +43 316 403274 10
----------------------------------------------------------------------
             Mariazell Online - http://www.mariazell.at/
----------------------------------------------------------------------

-----BEGIN GEEK CODE BLOCK-----
GIT/CS/AT dx(-) s+:(++:) a- C++ UBLVS++++$ P++>+++$ L-(+)$ E---
W+++$ N+(++) o-- K- w--()$ O-(--) M@ V-(--) PS+>++ PE(-) Y+ PGP(-)
t+ 5+ X+++(++++) R* tv++ b+(++) DI++ D-(--) G- e h--(*) r++ y?
------END GEEK CODE BLOCK------

_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Reply via email to