Le Ven 22 ao� 03 � 9:20:55 +0200, Nate Lawson <[EMAIL PROTECTED]> �crivait�: > If you have any of the devices listed below, please test with a recent > -stable or -current. They will stop working in 4.9 and 5.2 although old > behavior can _temporarily_ be enabled by adding "options DA_OLD_QUIRKS" to > your kernel config. If I don't hear from anyone, they'll be going away > permanently after the releases.
It is not directly related, but I have an USB memory stick, which works nicely on FreeBSD 5.1. A `camcontrol inquiry da0' reports: pass1: <3SYSTEM USB FLASH DISK 1.00> Removable Direct Access SCSI-2 device pass1: Serial Number pass1: 1.000MB/s transfers On 4.8-RELEASE and 4.8-STABLE, I cannot use it: when I plug it, I get these messages: umass0: 3SYSTEM USB FLASH DISK, rev 1.10/1.00, addr 2 umass0: BBB reset failed, IOERROR umass0: BBB bulk-in clear stall failed, IOERROR umass0: BBB bulk-out clear stall failed, IOERROR umass0: BBB reset failed, IOERROR umass0: BBB bulk-in clear stall failed, IOERROR umass0: BBB bulk-out clear stall failed, IOERROR umass0: BBB reset failed, IOERROR umass0: BBB bulk-in clear stall failed, IOERROR umass0: BBB bulk-out clear stall failed, IOERROR umass0: BBB reset failed, IOERROR umass0: BBB bulk-in clear stall failed, IOERROR umass0: BBB bulk-out clear stall failed, IOERROR umass0: BBB reset failed, IOERROR umass0: BBB bulk-in clear stall failed, IOERROR umass0: BBB bulk-out clear stall failed, IOERROR (da0:umass-sim0:0:0:0): got CAM status 0x4 (da0:umass-sim0:0:0:0): fatal error, failed to attach to device (da0:umass-sim0:0:0:0): lost device (da0:umass-sim0:0:0:0): removing device entry with or without "options DA_OLD_QUIRKS". -- Th. Thomas. _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
