Could you please send us the full dmesg output from your machine? I'm interested in which PHYs are attached to your bge devices.
Sure.
You are seeing these messages only for bge0, and not for bge1 -- right?
Correct, although I have nothing connected to bge1, so that tells us nothing.
It is the obvious thing to try, but it seems I am too lazy to walk over there and plug a cable in.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.9-RC #12: Fri Oct 3 10:16:43 EST 2003
[EMAIL PROTECTED]:/usr/local/obj/usr/src/sys/FUBAR
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1984149164 Hz
CPU: Intel(R) XEON(TM) CPU 2.00GHz (1984.15-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf24 Stepping = 4
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE ,MCA,C
MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
Hyperthreading: 2 logical CPUs
real memory = 536805376 (524224K bytes)
avail memory = 517910528 (505772K bytes)
Preloaded elf kernel "kernel" at 0xc044f000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 13 entries at 0xc00fc140
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xecc0-0xecff mem 0xfe000000-0xfe0ffff
f,0xfe204000-0xfe204fff irq 11 at device 4.0 on pci0
fxp0: Ethernet address 00:06:5b:88:18:bc
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> port 0xe800-0xe8ff mem 0xfe203000
-0xfe203fff irq 10 at device 6.0 on pci0
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec 2940 Ultra SCSI adapter> port 0xe400-0xe4ff mem 0xfe202000-0xfe20
2fff irq 11 at device 8.0 on pci0
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
pci0: <ATI Mach64-GR graphics accelerator> at 14.0
atapci0: <ServerWorks CSB5 ATA100 controller> port 0x8b0-0x8bf,0x8d8-0x8db,0x8d0
-0x8d7,0x8c8-0x8cb,0x8c0-0x8c7 at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <OHCI USB controller> at 15.2 irq 5
isab0: <PCI to ISA bridge (vendor=1166 device=0225)> at device 15.3 on pci0
isa0: <ISA bus> on isab0
pcib1: <Host to PCI bridge> on motherboard
pci1: <PCI bus> on pcib1
bge0: <Broadcom BCM5700 Gigabit Ethernet, ASIC rev. 0x7104> mem 0xfcf00000-0xfcf
0ffff irq 10 at device 6.0 on pci1
bge0: Ethernet address: 00:06:5b:88:18:bd
miibus1: <MII bus> on bge0
brgphy0: <BCM5401 10/100/1000baseTX PHY> on miibus1
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX
-FDX, auto
pcib7: <PCI to PCI bridge (vendor=8086 device=0309)> at device 8.0 on pci1
pci2: <PCI bus> on pcib7
pci2: <unknown card> (vendor=0x9005, dev=0x00c5) at 6.0 irq 11
pci2: <unknown card> (vendor=0x9005, dev=0x00c5) at 6.1 irq 10
aac0: <Dell PERC 3/Di> mem 0xf0000000-0xf7ffffff irq 11 at device 8.1 on pci1
aac0: i960RX 100MHz, 118MB cache memory, optional battery present
aac0: Kernel 2.7-0, Build 3153, S/N b821d3
aac0: Supported Options=55c<WCACHE,DATA64,HOSTTIME,WINDOW4GB,SOFTERR,SGMAP64>
pcib2: <Host to PCI bridge> on motherboard
pci3: <PCI bus> on pcib2
pcib8: <PCI to PCI bridge (vendor=1044 device=a500)> at device 6.0 on pci3
pci4: <PCI bus> on pcib8
asr0: <Adaptec Caching SCSI RAID> mem 0xec000000-0xedffffff irq 11 at device 6.1
on pci3
asr0: major=154
asr0: ADAPTEC 2100S FW Rev. 370F, 1 channel, 256 CCBs, Protocol I2O
isp0: <Qlogic ISP 2200 PCI FC-AL Adapter> port 0xbc00-0xbcff mem 0xeff00000-0xef
f00fff irq 10 at device 8.0 on pci3
pcib3: <Host to PCI bridge> on motherboard
pci5: <PCI bus> on pcib3
pcib4: <Host to PCI bridge> on motherboard
pci6: <PCI bus> on pcib4
pcib5: <ServerWorks CIOB30 host to PCI bridge> on motherboard
pci7: <PCI bus> on pcib5
pcib6: <ServerWorks CIOB30 host to PCI bridge> on motherboard
pci8: <PCI bus> on pcib6
pcib9: <ServerWorks CIOB30 host to PCI bridge> on motherboard
pci9: <PCI bus> on pcib9
pci9: <unknown card> (vendor=0x8086, dev=0x1008) at 6.0 irq 11
pcib14: <ServerWorks CIOB30 host to PCI bridge> on motherboard
pci14: <PCI bus> on pcib14
bge1: <Broadcom BCM5701 Gigabit Ethernet, ASIC rev. 0x105> mem 0xead00000-0xead0
ffff irq 10 at device 6.0 on pci14
bge1: Ethernet address: 00:10:18:02:2c:d8
miibus2: <MII bus> on bge1
brgphy1: <BCM5701 10/100/1000baseTX PHY> on miibus2
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX
-FDX, auto
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xcc7ff,0xd
4000-0xd47ff,0xec000-0xeffff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
IPsec: Initialized Security Association Processing.
ata0-slave: ATAPI identify retries exceeded
acd0: DVD-ROM <LG DVD-ROM DRN-8080B> at ata0-master PIO4
aacd0: <RAID 5> on aac0
aacd0: 32768MB (67108992 sectors)
aacd1: <RAID 5> on aac0
aacd1: 32768MB (67108992 sectors)
aacd2: <RAID 5> on aac0
aacd2: 38601MB (79056000 sectors)
sa0 at ahc0 bus 0 target 6 lun 0
sa0: <ARCHIVE Python 06408-XXX 9050> Removable Sequential Access SCSI-3 device
sa0: 80.000MB/s transfers (40.000MHz, offset 32, 16bit)
Mounting root from ufs:/dev/aacd0s1a
bge0: gigabit link up
_______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
