Am Donnerstag, 1. Juli 2004 09:32 schrieb Steve O'Hara-Smith: > On Tue, 29 Jun 2004 13:40:11 +0200 > > "Conrad Burger" <[EMAIL PROTECTED]> wrote: > > That's until I unplugged one of the array members. > > The system boots up fine from the second disk, > > but the problem ... I can't get atacontrol to rebuild the mirror onto the > > disk that was removed. > > > > I have tried every command on the atacontrol man page, but to no avail. > > I came across this advice in a December 2003 posting here, I'd be > interested to know if it works for you. > > ------------------------------------------------------------------- > From: Harald Schmalzbauer <[EMAIL PROTECTED]> > To: [EMAIL PROTECTED], <[EMAIL PROTECTED]> > Subject: Re: Problem with Sil 680 RAID card > Date: Thu, 4 Dec 2003 15:04:41 +0100 > > <snip stuff about creating RAID arrays with atacontrol> > > Rebuilding is a bit complex. You have to do a 'atacontrol detach > "channelOfTheFailedDrive"' > and 'atacontrol attach "channelOfTheFailedDrive"' then 'atacontrol rebuild > ar0'
This was only for the sil0680 chipset. HPT372 e.g. is completley unsupported in -stable. I've never tried ataraid with "non-raid" controllers but I doubt that detach/attach would work. I asked S�ren about the missing addspare in -stable but never got any answer. I just had extreme problems with ataraid on -current and am awaiting some response about these issues, I just can hope that some time ataraid will be lifted to what the man page promises. -Harry > --------------------------------------------------------------------
pgpt2aMP0gYGO.pgp
Description: signature
