On Thu, 23 Sep 2004, Kenwey wrote: > I get a warning message when I boot my FreeBSD 5.1, it shows as follows: > > Detecting Primary Master ...WDC WD400JB-00ETA0 (40GB, running FreeBSD 5.1) > Detecting Primary Slave ... None > Detecting Secondary Master .WDC WD400BB-32CXA0 (40GB, /lib can't work well) > Detecting Secondary Slave ASUS CD-S520/A > SMART Failure Predicted on Primary Master: WDC WD400JB-00ETA0 > WARNING: Immediately backup your data and replace your hard disk drive > A failure may be imminent. > Press F1 to conitnue, DEL to enter SETUP > 02/16/2000-VT694X-P4V4X-00
This is from your BIOS. I believe the 'smartmon' port may be able to give you some additional information. > I turn off the machine, and pull it (WDC WD400JB-00ETA0) from > master and connect it to slave, then I do the following to backup : > > # mount -r /dev/ad2s1a /mnt > > it shows: incorrect super block I don't understand what you've done here. Please post 'dmesg | grep ad' in the new situation. -- Doug White | FreeBSD: The Power to Serve [EMAIL PROTECTED] | www.FreeBSD.org _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
