On Sun, Dec 12, 2004 at 10:46:53AM +0100, Jorn Argelo wrote.. > On Sun, 12 Dec 2004 09:50:05 +0100, Niels Piersma wrote > > Hi, > > > > I want to use the RAID1 on this ASUS mobo. I've configured it as > > RAID1 in the bios, but BSD53 just sees two discs and not a RAID1 > > array. (ad4 and ad6). The drives are two identical Maxtor 80Gb SATA discs. > > > > Are you sure that you actually made an RAID1 array using the BIOS of the RAID > controller itself? > > Other then that, I am not sure if FreeBSD 5.3 is going to support your RAID > controller. Mine was never fully detected neither by BSD nor Linux (I have an > ASUS K8V SE Deluxe). If you array is not detected, then the odds are > relatively high that you will have to switch to FreeBSD 4.10, which has a > massive amount of support for several RAID- and SCSI controllers. > > > Piersma.COM is een handelsnaam van Piersma Beheer B.V. > > You might want to consider not writing anything in Dutch on a public mailing > list. Most folks won't understand it anyway ;).
Its a legal disclaimer. ETOOMANYLAWYERSONTHISPLANET -- Wilko Bulte [EMAIL PROTECTED] _______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
