Hi, I'm having trouble burning CD's from FreeBSD 5.3 guest through WinXP host on VMWare Workstation 4.5.2
My VMWare workstation is complaining about DMA mode when I run: "burncd -s 10 -f /dev/acd0 data test.iso fixate" The error message from VMWare I get is: "Your virtual machine has sent an ATAPI (CD-ROM) command that is only supported when programming the drive via DMA. You will need to configure your guest operating system to use DMA when communicating with DVD/CD-ROM devices. Note that some operating systems will report DMA is available without actually using it. In those cases, normal CD-ROM operations will still be available, but special features will only be available if you re-configure the virtual device as a SCSI device." FreeBSD gives the follwing: "burncd: ioctl(CDRIOCINITTRACK): Input/output error" I have the following lines in my loader.conf: hw.ata.atapi_dma="1" hw.ata.ata_dma="1" and have also tried configuring dma when system is up by running: atacontrol mode 1 udma4 udma4 Any Ideas? Many thanks in advance, Radster _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
