Hi
S�ren Schmidt wrote:
Hmm, does it work without apic ? without ACPI ? And your cabling is correct and spec conformant ? The 686A' I have in the lab works just dandy...
I test all combinations (with/without apic | with/without ACPI), and problems persist.
It will be that the problem is not with the compatibility of the controller with my HD?
I changed 3 times the cable. I don't think that cable is problem.
-- # atacontrol cap 0 0 -- ATA channel 0, Master, device ad0:
Protocol ATA/ATAPI revision 5 device model QUANTUM FIREBALLlct20 10 serial number 551110736472 firmware revision APL.0900 cylinders 16383 heads 16 sectors/track 63 lba supported 20044080 sectors lba48 not supported dma supported overlap not supported
Feature Support Enable Value Vendor write cache yes yes read ahead yes yes Tagged Command Queuing (TCQ) no no 0/0x00 SMART yes yes microcode download yes yes security yes no power management yes yes advanced power management no no 0/0x00 automatic acoustic management yes no 0/0x00 0/0x00 --
-- controller --
atapci0: <VIA 82C686A UDMA66 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
[EMAIL PROTECTED]:7:1: class=0x01018a card=0x00000000 chip=0x05711106 rev=0x06 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82xxxx EIDE Controller (All VIA Chipsets)'
class = mass storage
subclass = ATA
--
-- Marcus Grando Grupos Internet S/A marcus(at)corp.grupos.com.br _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
