Here is my DMSG boot info. Mar 21 21:41:42 kernel: sio7: unable to activate interrupt in fast mode - using normal mode Mar 21 21:41:42 kernel: sio7: type 16550A Mar 21 21:41:42 kernel: sio7: <Oxford Semiconductor OX16PCI954 UARTs 950A> on puc0 Mar 21 21:41:42 kernel: sio6: unable to activate interrupt in fast mode - using normal mode Mar 21 21:41:42 kernel: sio6: type 16550A Mar 21 21:41:42 kernel: sio6: <Oxford Semiconductor OX16PCI954 UARTs 950A> on puc0 Mar 21 21:41:42 kernel: sio5: unable to activate interrupt in fast mode - using normal mode Mar 21 21:41:42 kernel: sio5: type 16550A Mar 21 21:41:42 kernel: sio5: <Oxford Semiconductor OX16PCI954 UARTs 950A> on puc0 Mar 21 21:41:42 kernel: sio4: unable to activate interrupt in fast mode - using normal mode Mar 21 21:41:42 kernel: sio4: type 16550A Mar 21 21:41:42 kernel: sio4: <Oxford Semiconductor OX16PCI954 UARTs 950A> on puc0 Mar 21 21:41:42 kernel: puc0: <Oxford Semiconductor OX16PCI954 UARTs 950A> port 0xe800-0xe81f,0xe700-0xe71f mem 0xec111000-0xec111fff,0xec110000-0xec110fff irq 14 at device 11.0 on pci0
Thanks JBD -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Joe Doran Sent: Monday, March 21, 2005 7:26 PM To: [email protected] Subject: SIIG Multiport Card Hello, I am trying to us a SIIG 4 port Multi-port card on FreeBSD 5.3, and I am having issues with the baud rate. The kernel finds the four ports, and I can open them, but I am unable to change the Baud Rate. It is stuck at 115,200. I have this in my kernel config. device pcu device sio Thanks JBD _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]" _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
