Doug White wrote:
On Fri, 25 Mar 2005, Graham Menhennitt wrote:
I just cvsupped to the latest RELENG_5 (as of yesterday) and built and installed the world and a new kernel. When I boot the new kernel, I get an error "ffs_mountroot: can't find rootvp". At the "mountroot>" prompt, whatever I type (even '?') causes a crash and reboot. I can still boot my old kernel without a problem. The dmesg from the old kernel and a capture of the boot of the new kernel are below. Noticably absent from the new one is the line "ad0: 76319MB <ST380011A/3.06> [155061/16/63] at ata0-master UDMA100" which is my only disk drive.
Can somebody please help?
Hi Doug. Thanks for responding.
If you break out of the beastie menu with '6' then enter:
unload boot kernel.old
that will get you your old, working kernel. Make a backup of this kernel
before doing anything else by 'cd /boot; cp -Rp kernel.old kernel.WORKS'.
You can then reference this in loader by doing 'boot kernel.WORKS'.
Already done that.
Next we need to determine why the disk did not probe. I'd suggest booting with -v and looking for messages from ata about disk discovery.
A capture of the "boot -v" is below. It doesn't mean anything to me.
Did you change anything in your kernel config between these kernels?
No. My kernel config is below too.
Thanks again for helping, Graham
>>>>>>>>>>>>>>>>>>>>>>>> new kernel with -v flag <<<<<<<<<<<<<<<<<<<<<<<<<<<<<Thanks, Graham
>>>>>>>>>>>>>>>>> old kernel <<<<<<<<<<<<<<<<<<<<<<
Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-STABLE #18: Fri Jan 21 06:23:06 EST 2005 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/fang Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 1.70GHz (1700.03-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf12 Stepping = 2
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM> real memory = 335478784 (319 MB) avail memory = 322949120 (307 MB) npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <GBT AWRDACPI> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0x4000-0x40f7,0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci2: <ACPI PCI bus> on pcib2 rl0: <RealTek 8139 10/100BaseTX> port 0xc000-0xc0ff mem 0xe4000000-0xe40000ff irq 11 at device 9.0 on pci2 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:20:ed:1c:da:f9 pci2: <multimedia, audio> at device 10.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH2 UDMA100 controller> port 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xd000-0xd01f irq 5 at device 31.2 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <serial bus, SMBus> at device 31.3 (no driver attached) uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xd800-0xd81f irq 12 at device 31.4 on pci0 uhci1: [GIANT-LOCKED] usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: [FAST] sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A, console sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0: <Standard parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 ppbus0: IEEE1284 device found Probing for PnP devices on ppbus0: lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] Timecounter "TSC" frequency 1700030560 Hz quality 800 Timecounters tick every 10.000 msec acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0% ad0: 76319MB <ST380011A/3.06> [155061/16/63] at ata0-master UDMA100 Mounting root from ufs:/dev/ad0s1a
>>>>>>>>>>>>>>>>>>>>> new kernel <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-Console: serial port BIOS drive A: is disk0 BIOS drive C: is disk1 BIOS 639kB/326592kB available memory
FreeBSD/i386 bootstrap loader, Revision 1.1 ([EMAIL PROTECTED], Wed Mar 23 20:16:31 EST 2005) |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\Loading /boot/defaults/loader.conf |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\/boot/kernel/kernel text=0x252bec |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|data=0x2bbe8+0x30518 /-\|/-\|/-\|syms=[0x4+0x36040/-\|/-\|/-\|/-+0x4+0x44316\|/-\|/-\|/-\|/-\] |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/Loading /boot/defaults/loader.conf -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-[H[J[4;46H , ,[5;46H /( )`[6;46H \ \___ / |[7;46H /- _ `-/ '[8;46H (/\/ \ \ /\[9;46H / / | ` \[10;46H O O ) / |[11;46H `-^--'`< '[12;46H (_.) _ ) /[13;46H `.___/` /[14;46H `-----' /[15;46H<----. __ / __ \[16;46H<----|====O)))==) \) /====[17;46H<----' `--' `.__,' \[18;46H | |[19;46H \ / /\[20;46H ______( (_ / \______/[21;46H ,' ,-----' |[22;46H `--{__________)[3;2H�[4;2H�[5;2H�[6;2H�[7;2H�[8;2H�[9;2H�[10;2H�[11;2H�[12;2H�[13;2H�[14;2H�[15;2H�[16;2H�[17;2H�[18;2H�[19;2H�[20;2H�[21;2H�[3;44H�[4;44H�[5;44H�[6;44H�[7;44H�[8;44H�[9;44H�[10;44H�[11;44H�[12;44H�[13;44H�[14;44H�[15;44H�[16;44H�[17;44H�[18;44H�[19;44H�[20;44H�[21;44H�[2;3H�����������������������������������������[22;3H�����������������������������������������[2;2H�[22;2H�[2;44H�[22;44H�[6;13HWelcome to FreeBSD![9;5H1 [9;6H. Boot FreeBSD [default][10;5H2 [10;6H. Boot FreeBSD with ACPI disabled[11;5H3 [11;6H. Boot FreeBSD in Safe Mode[12;5H4 [12;6H. Boot FreeBSD in single user mode[13;5H5 [13;6H. Boot FreeBSD with verbose logging[14;5H6 [14;6H. Escape to loader prompt[15;5H7 [15;6H. Reboot[20;5HSelect option, [Enter] for default[21;5Hor [Space] to pause timer [21;32H10 [21;32H10 [21;32H10 [21;32H10 [21;32H9 [21;32H9 [21;32H9 [21;32H9 [21;32H9 [21;32H9 [21;32H9 [21;32H9 [21;32H9 [21;32H9 [21;32H9 [21;32H9 [21;32H9 [21;32H9 [21;32H9 [21;32H9 [21;32H9 [21;32H8 [21;32H8 [21;32H8 [21;32H8 [21;32H8 [21;32H8 [21;32H8 [21;32H8 [21;32H8 [21;32H8 [21;32H8 [21;32H8 [21;32H8 [25;0H\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-ACPI autoload failed - no such file or directory \|/-\|/Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.4-PRERELEASE #19: Fri Mar 25 07:31:35 EST 2005 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/fang Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 1.70GHz (1700.03-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf12 Stepping = 2
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM> real memory = 335478784 (319 MB) avail memory = 322957312 (307 MB) npx0: <math processor> on motherboard npx0: INT 16 interface cpu0 on motherboard pcib0: <Host to PCI bridge> pcibus 0 on motherboard pir0: <PCI Interrupt Routing Table: 9 Entries> on motherboard pci0: <PCI bus> on pcib0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pcib2: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0 pci2: <PCI bus> on pcib2 rl0: <RealTek 8139 10/100BaseTX> port 0xc000-0xc0ff mem 0xe4000000-0xe40000ff irq 11 at device 9.0 on pci2 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:20:ed:1c:da:f9 pci2: <multimedia, audio> at device 10.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH2 UDMA100 controller> port 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xd000-0xd01f irq 5 at device 31.2 on pci0 usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <serial bus, SMBus> at device 31.3 (no driver attached) uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xd800-0xd81f irq 12 at device 31.4 on pci0 usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 ppbus0: IEEE1284 device found Probing for PnP devices on ppbus0: lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A unknown: <PNP0303> can't assign resources (port) unknown: <PNP0501> can't assign resources (port) unknown: <PNP0700> can't assign resources (port) unknown: <PNP0400> can't assign resources (port) unknown: <PNP0501> can't assign resources (port) Timecounter "TSC" frequency 1700026032 Hz quality 800 Timecounters tick every 10.000 msec Mounting root from ufs:/dev/ad0s1a setrootbyname failed ffs_mountroot: can't find rootvp Root mount failed: 6
Manual root filesystem specification: <fstype>:<device> Mount <device> using filesystem <fstype> eg. ufs:da0s1a ? List valid disk boot devices <empty line> Abort manual input
mountroot> _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-Console: serial port
BIOS drive A: is disk0
BIOS drive C: is disk1
BIOS 639kB/326592kB available memory
FreeBSD/i386 bootstrap loader, Revision 1.1
([EMAIL PROTECTED], Wed Mar 23 20:16:31 EST 2005)
|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\Loading /boot/defaults/loader.conf
|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\/boot/kernel/kernel text=0x252bec |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|data=0x2bbe8+0x30518 /-\|/-\|/-\|syms=[0x4+0x36040/-\|/-\|/-\|/-+0x4+0x44316\|/-\|/-\|/-\|/-\]
|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/Loading /boot/defaults/loader.conf
-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-[H[J[4;46H , ,[5;46H /( )`[6;46H \ \___ / |[7;46H /- _ `-/ '[8;46H (/\/ \ \ /\[9;46H / / | ` \[10;46H O O ) / |[11;46H `-^--'`< '[12;46H (_.) _ ) /[13;46H `.___/` /[14;46H `-----' /[15;46H<----. __ / __ \[16;46H<----|====O)))==) \) /====[17;46H<----' `--' `.__,' \[18;46H | |[19;46H \ / /\[20;46H ______( (_ / \______/[21;46H ,' ,-----' |[22;46H `--{__________)[3;2H�[4;2H�[5;2H�[6;2H�[7;2H�[8;2H�[9;2H�[10;2H�[11;2H�[12;2H�[13;2H�[14;2H�[15;2H�[16;2H�[17;2H�[18;2H�[19;2H�[20;2H�[21;2H�[3;44H�[4;44H�[5;44H�[6;44H�[7;44H�[8;44H�[9;44H�[10;44H�[11;44H�[12;44H�[13;44H�[14;44H�[15;44H�[16;44H�[17;44H�[18;44H�[19;44H�[20;44H�[21;44H�[2;3H�����������������������������������������[22;3H�����������������������������������������[2;2H�[22;2H�[2;44H�[22;44H�[6;13HWelcome to FreeBSD![9;5H1 [9;6H. Boot FreeBSD [default][10;5H2 [10;6H. Boot FreeBSD with ACPI disabled[11;5H3 [11;6H. Boot FreeBSD in Safe Mode[12;5H4 [12;6H. Boot FreeBSD in single user mode[13;5H5 [13;6H. Boot FreeBSD with verbose logging[14;5H6 [14;6H. Escape to loader prompt[15;5H7 [15;6H. Reboot[20;5HSelect option, [Enter] for default[21;5Hor [Space] to pause timer [21;32H10 [21;32H10 [21;32H10 [21;32H10 [21;32H10 [21;32H10 [21;32H10 [21;32H10 [21;32H9 [21;32H9 [21;32H9 [21;32H9 [21;32H9 [21;32H9 [25;0H
Type '?' for a list of commands, 'help' for more detailed help.
OK boot -v
\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-ACPI autoload failed - no such file or directory
\|/-\|/SMAP type=01 base=0000000000000000 len=000000000009fc00
SMAP type=01 base=000000000009fc00 len=0000000000000400
SMAP type=02 base=00000000000f0000 len=0000000000010000
SMAP type=02 base=00000000fec00000 len=0000000001400000
SMAP type=01 base=0000000000100000 len=0000000013ef0000
SMAP type=03 base=0000000013ff3000 len=000000000000d000
SMAP type=04 base=0000000013ff0000 len=0000000000003000
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-PRERELEASE #19: Fri Mar 25 07:31:35 EST 2005
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/fang
Preloaded elf kernel "/boot/kernel/kernel" at 0xc072c000.
Calibrating clock(s) ... i8254 clock: 1193225 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1700030456 Hz
CPU: Intel(R) Pentium(R) 4 CPU 1.70GHz (1700.03-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf12 Stepping = 2
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory = 335478784 (319 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009ffff, 651264 bytes (159 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000825000 - 0x0000000013a1ffff, 320843776 bytes (78331 pages)
avail memory = 322957312 (307 MB)
bios32: Found BIOS32 Service Directory header at 0xc00faa40
bios32: Entry = 0xfaed0 (c00faed0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xaf00
pnpbios: Found PnP BIOS data at 0xc00fb8f0
pnpbios: Entry = f0000:b920 Rev = 1.0
Other BIOS signatures found:
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000090
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=00000010)
pcibios: BIOS version 2.10
Found $PIR table, 9 entries at 0xc00fded0
PCI-Only Interrupts: 5 9 10 11 12
Location Bus Device Pin Link IRQs
slot 1 0 2 A 0x60 3 4 5 7 9 10 11 12 14 15
slot 1 0 2 B 0x61 3 4 5 7 9 10 11 12 14 15
slot 1 0 2 C 0x62 3 4 5 7 9 10 11 12 14 15
slot 1 0 2 D 0x63 3 4 5 7 9 10 11 12 14 15
slot 2 2 8 A 0x68 3 4 5 7 9 10 11 12 14 15
slot 2 2 8 B 0x69 3 4 5 7 9 10 11 12 14 15
slot 2 2 8 C 0x6a 3 4 5 7 9 10 11 12 14 15
slot 2 2 8 D 0x6b 3 4 5 7 9 10 11 12 14 15
slot 3 2 0 A 0x62 3 4 5 7 9 10 11 12 14 15
slot 3 2 0 B 0x69 3 4 5 7 9 10 11 12 14 15
slot 3 2 0 C 0x6a 3 4 5 7 9 10 11 12 14 15
slot 3 2 0 D 0x60 3 4 5 7 9 10 11 12 14 15
slot 4 2 1 A 0x69 3 4 5 7 9 10 11 12 14 15
slot 4 2 1 B 0x6a 3 4 5 7 9 10 11 12 14 15
slot 4 2 1 C 0x60 3 4 5 7 9 10 11 12 14 15
slot 4 2 1 D 0x62 3 4 5 7 9 10 11 12 14 15
slot 5 2 2 A 0x6a 3 4 5 7 9 10 11 12 14 15
slot 5 2 2 B 0x60 3 4 5 7 9 10 11 12 14 15
slot 5 2 2 C 0x62 3 4 5 7 9 10 11 12 14 15
slot 5 2 2 D 0x69 3 4 5 7 9 10 11 12 14 15
slot 6 2 9 A 0x69 3 4 5 7 9 10 11 12 14 15
slot 6 2 9 B 0x6a 3 4 5 7 9 10 11 12 14 15
slot 6 2 9 C 0x60 3 4 5 7 9 10 11 12 14 15
slot 6 2 9 D 0x62 3 4 5 7 9 10 11 12 14 15
slot 7 2 10 A 0x6a 3 4 5 7 9 10 11 12 14 15
slot 7 2 10 B 0x60 3 4 5 7 9 10 11 12 14 15
slot 7 2 10 C 0x62 3 4 5 7 9 10 11 12 14 15
slot 7 2 10 D 0x69 3 4 5 7 9 10 11 12 14 15
embedded 0 31 A 0x60 3 4 5 7 9 10 11 12 14 15
embedded 0 31 B 0x61 3 4 5 7 9 10 11 12 14 15
embedded 0 31 C 0x6b 3 4 5 7 9 10 11 12 14 15
embedded 0 31 D 0x63 3 4 5 7 9 10 11 12 14 15
embedded 0 1 A 0x60 3 4 5 7 9 10 11 12 14 15
embedded 0 1 B 0x61 3 4 5 7 9 10 11 12 14 15
embedded 0 1 C 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 1 D 0x63 3 4 5 7 9 10 11 12 14 15
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 9 Entries> on motherboard
$PIR: Links after initial probe:
Link IRQ Rtd Ref IRQs
0x60 255 N 8 3 4 5 7 9 10 11 12 14 15
0x61 255 N 3 3 4 5 7 9 10 11 12 14 15
0x62 255 N 7 3 4 5 7 9 10 11 12 14 15
0x63 255 N 3 3 4 5 7 9 10 11 12 14 15
0x68 255 N 1 3 4 5 7 9 10 11 12 14 15
0x69 255 N 6 3 4 5 7 9 10 11 12 14 15
0x6a 255 N 6 3 4 5 7 9 10 11 12 14 15
0x6b 255 N 2 3 4 5 7 9 10 11 12 14 15
$PIR: Found matching pin for 2.9.INTA at func 0: 11
$PIR: Found matching pin for 2.10.INTA at func 0: 10
$PIR: Found matching pin for 0.31.INTB at func 3: 9
$PIR: Found matching pin for 0.31.INTC at func 4: 12
$PIR: Found matching pin for 0.31.INTD at func 2: 5
$PIR: Links after initial IRQ discovery:
Link IRQ Rtd Ref IRQs
0x60 255 N 8 3 4 5 7 9 10 11 12 14 15
0x61 9 Y 3 3 4 5 7 9 10 11 12 14 15
0x62 255 N 7 3 4 5 7 9 10 11 12 14 15
0x63 5 Y 3 3 4 5 7 9 10 11 12 14 15
0x68 255 N 1 3 4 5 7 9 10 11 12 14 15
0x69 11 Y 6 3 4 5 7 9 10 11 12 14 15
0x6a 10 Y 6 3 4 5 7 9 10 11 12 14 15
0x6b 12 Y 2 3 4 5 7 9 10 11 12 14 15
$PIR: IRQs used by BIOS: 5 9 10 11 12
$PIR: Interrupt Weights:
[ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ]
[ 0 0 0 0 0 3 0 0 0 3 6 6 2 0 0 0 ]
pci0: <PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base e0000000, size 26, enabled
found-> vendor=0x8086, dev=0x1a30, revid=0x03
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x1a31, revid=0x03
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x244e, revid=0x12
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2440, revid=0x12
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000f000, size 4, enabled
found-> vendor=0x8086, dev=0x244b, revid=0x12
bus=0, slot=31, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000d000, size 5, enabled
$PIR: 0:31 INTD routed to irq 5
found-> vendor=0x8086, dev=0x2442, revid=0x12
bus=0, slot=31, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=5
map[20]: type 4, range 32, base 00005000, size 4, enabled
$PIR: 0:31 INTB routed to irq 9
found-> vendor=0x8086, dev=0x2443, revid=0x12
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=9
map[20]: type 4, range 32, base 0000d800, size 5, enabled
$PIR: 0:31 INTC routed to irq 12
found-> vendor=0x8086, dev=0x2444, revid=0x12
bus=0, slot=31, func=4
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=12
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xfff00000-0xfffff
pcib1: prefetched decode 0xfff00000-0xfffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
pcib2: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xc000-0xcfff
pcib2: memory decode 0xe4000000-0xe40fffff
pcib2: prefetched decode 0xfff00000-0xfffff
pcib2: Subtractively decoded bridge.
pci2: <PCI bus> on pcib2
pci2: physical bus=2
map[10]: type 4, range 32, base 0000c000, size 8, enabled
pcib2: device (null) requested decoded I/O range 0xc000-0xc0ff
map[14]: type 1, range 32, base e4000000, size 8, enabled
pcib2: device (null) requested decoded memory range 0xe4000000-0xe40000ff
$PIR: 2:9 INTA routed to irq 11
found-> vendor=0x10ec, dev=0x8139, revid=0x10
bus=2, slot=9, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000c400, size 6, enabled
pcib2: device (null) requested decoded I/O range 0xc400-0xc43f
$PIR: 2:10 INTA routed to irq 10
found-> vendor=0x1274, dev=0x5880, revid=0x04
bus=2, slot=10, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0410, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x0c (3000 ns), maxlat=0x80 (32000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
rl0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xc000
pcib2: device rl0 requested decoded I/O range 0xc000-0xc0ff
rl0: <RealTek 8139 10/100BaseTX> port 0xc000-0xc0ff mem 0xe4000000-0xe40000ff irq 11 at device 9.0 on pci2
pcib2: device rl0 requested decoded I/O range 0xc000-0xc0ff
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: bpf attached
rl0: Ethernet address: 00:20:ed:1c:da:f9
rl0: [MPSAFE]
pci2: <multimedia, audio> at device 10.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 UDMA100 controller> port 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xf000
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x90 err=0x90 lsb=0x90 msb=0x90
ata0-master: stat=0x90 err=0x90 lsb=0x90 msb=0x90
ata0-master: stat=0x90 err=0x90 lsb=0x90 msb=0x90
ata0-master: stat=0x90 err=0x90 lsb=0x90 msb=0x90
ata0-master: stat=0x90 err=0x90 lsb=0x90 msb=0x90
ata0-master: stat=0x90 err=0x90 lsb=0x90 msb=0x90
ata0-master: stat=0x90 err=0x90 lsb=0x90 msb=0x90
ata0-master: stat=0x90 err=0x90 lsb=0x90 msb=0x90
ata0-slave: stat=0x90 err=0x90 lsb=0x90 msb=0x90
ata0: reset tp2 stat0=90 stat1=90 devices=0x0
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=00 ostat1=00
ata1-master: stat=0x01 err=0x01 lsb=0x01 msb=0x01
ata1-slave: stat=0x01 err=0x01 lsb=0x01 msb=0x01
ata1: reset tp2 stat0=01 stat1=01 devices=0x0
ata1: [MPSAFE]
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xd000-0xd01f irq 5 at device 31.2 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd000
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xd800-0xd81f irq 12 at device 31.4 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd800
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
pnpbios: 15 devices, largest 92 bytes
PNP0200: adding dma mask 0x10
PNP0200: adding io range 0-0xf, size=0x10, align=0
PNP0200: adding io range 0x81-0x83, size=0x3, align=0
PNP0200: adding io range 0x87-0x87, size=0x1, align=0
PNP0200: adding io range 0x89-0x8b, size=0x3, align=0
PNP0200: adding io range 0x8f-0x91, size=0x3, align=0
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0
pnpbios: handle 1 device ID PNP0200 (0002d041)
PNP0100: adding irq mask 0x1
PNP0100: adding io range 0x40-0x43, size=0x4, align=0
pnpbios: handle 2 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0
pnpbios: handle 3 device ID PNP0b00 (000bd041)
PNP0303: adding irq mask 0x2
PNP0303: adding io range 0x60-0x60, size=0x1, align=0
PNP0303: adding io range 0x64-0x64, size=0x1, align=0
pnpbios: handle 4 device ID PNP0303 (0303d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0
pnpbios: handle 5 device ID PNP0800 (0008d041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0
pnpbios: handle 6 device ID PNP0c04 (040cd041)
INT0800: adding fixed memory32 range 0xffb80000-0xffbfffff, size=0x80000
pnpbios: handle 7 device ID INT0800 (0008d425)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xffb00000-0xffb7ffff, size=0x80000
PNP0c01: adding fixed memory32 range 0xfff00000-0xffffffff, size=0x100000
PNP0c01: adding fixed memory32 range 0xfec00000-0xfec0ffff, size=0x10000
PNP0c01: adding fixed memory32 range 0xfee00000-0xfee0ffff, size=0x10000
PNP0c01: adding fixed memory32 range 0x100000-0x13ffffff, size=0x13f00000
pnpbios: handle 8 device ID PNP0c01 (010cd041)
PNP0c02: adding fixed memory32 range 0xf0000-0xf3fff, size=0x4000
PNP0c02: adding fixed memory32 range 0xf4000-0xf7fff, size=0x4000
PNP0c02: adding fixed memory32 range 0xf8000-0xfbfff, size=0x4000
PNP0c02: adding fixed memory32 range 0xfc000-0xfffff, size=0x4000
pnpbios: handle 9 device ID PNP0c02 (020cd041)
PNP0a03: adding io range 0x294-0x297, size=0x4, align=0
PNP0a03: adding io range 0x4d0-0x4d1, size=0x2, align=0
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0
PNP0a03: adding io range 0x4000-0x40f7, size=0xf8, align=0
pnpbios: handle 10 device ID PNP0a03 (030ad041)
PNP0501: adding irq mask 0x10
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0
pnpbios: handle 12 device ID PNP0501 (0105d041)
PNP0700: adding dma mask 0x4
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0
PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0
PNP0700: adding irq mask 0x40
pnpbios: handle 13 device ID PNP0700 (0007d041)
PNP0400: adding irq mask 0x80
PNP0400: adding io range 0x378-0x37f, size=0x8, align=0
PNP0400: adding io range 0x778-0x77b, size=0x4, align=0
pnpbios: handle 14 device ID PNP0400 (0004d041)
PNP0501: adding irq mask 0x8
PNP0501: adding io range 0x2f8-0x2ff, size=0x8, align=0
pnpbios: handle 16 device ID PNP0501 (0105d041)
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, generic (0), config:0x0, flags:0x1f0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0067
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: ic_type 90 part_id 80
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ppbus0: IEEE1284 device found
Probing for PnP devices on ppbus0:
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
sc0: no video adapter found.
sc0: <System console> failed to probe on isa0
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> failed to probe on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
unknown: <PNP0800> failed to probe at port 0x61 on isa0
unknown: <INT0800> failed to probe at iomem 0xffb80000-0xffbfffff on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0
unknown: <PNP0400> can't assign resources (port)
unknown: <PNP0400> at port 0x378-0x37f on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x2f8-0x2ff on isa0
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1700030456 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
Mounting root from ufs:/dev/ad0s1a
setrootbyname failed
ffs_mountroot: can't find rootvp
Root mount failed: 6
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual inputmountroot>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> kernel config <<<<<<<<<<<<<<<<<<<<<<<<<<<<<
machine i386
cpu I686_CPU
ident fang
options SCHED_4BSD #4BSD scheduler options INET #InterNETworking options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options SOFTUPDATES #Enable FFS soft updates support options NFSCLIENT #Network Filesystem Client options NFSSERVER #Network Filesystem Server options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options PROCFS #Process filesystem (requires PSEUDOFS) options PSEUDOFS #Pseudo-filesystem framework options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options COMPAT_FREEBSD4 #Compatible with FreeBSD4 options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev
device isa device pci
device fdc
device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives options ATA_STATIC_ID #Static device numbering
device atkbdc # AT keyboard controller device atkbd # AT keyboard device psm # PS/2 mouse
device vga # VGA video card driver
device sc
device npx
device sio # 8250, 16[45]50 based serial ports
device ppc device ppbus # Parallel port bus (required) device lpt # Printer
device rl # RealTek 8129/8139 device miibus # MII bus support
device random # Entropy device device loop # Network loopback device ether # Ethernet support device pty # Pseudo-ttys (telnet etc)
#device pcm #device sbc
device usb # USB Bus (required) device umass # Disks/Mass storage - Requires scbus and da device scbus # SCSI bus (required for SCSI) device da # Direct Access (disks) device pass # Passthrough device (direct SCSI access) device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface
device bpf # Berkeley packet filter
_______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
