Hello,
try and switch the mode to PIO. You can use atacontrol when the
system is running. Try and set the PIO in the BIOS to boot without DMA.
Cheers,
Vladimir
On Sat, 21 May 2005, Remi Degruson wrote:
Hello,
On one of my computers, the 5.4 RELEASE bootonly disc don't want to write on my
hdd.
The same hdd is ok whith other computer.
I have the same log whith 2 another hdd :
atapci0: <VIA 82C686A UDMA666 controller> port
0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
ata0: channel #0 on atapci0
...
ad0: 4104MB <ST34311A/6.01> [8895/15/63] at ata0-master UDMA66
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=63
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=63
ad0: FAILURE - READ_DMA status=51<READY,DSC,ERROR> error=48<ICRC,ABORTED> LBA=63
It's my first attempt to install freebsd on this computer.
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
