> -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Karl Denninger > Sent: Thursday, August 11, 2005 4:25 PM > To: freebsd-stable@freebsd.org > Subject: Re: ad10: WARNING - READ_DMA UDMA ICRC error > (retryingrequest)LBA=11441599 > > On Thu, Aug 11, 2005 at 03:44:52PM -0700, Vinod Kashyap wrote: > > > I have two controllers here that are from different manufacturers > > > and both exhibit the same problem. The SAME disks (two different > > > manufacturers - hitachi and maxtor) on a motherboard ICH5 adapter > > > work perfectly, smartmontools says all 4 (I have two examples of > > > each) are healthy, and both ALSO work perfectly on and > are declared > > > healthy by a 3ware 8502's internal diags and operating kernel > > > (smartmontools won't talk to them on the 8502.) > > > > > > > smartmontools should support 3ware 7xxx & 8xxx controllers, > although > > not 9xxx controllers. See the answer to the question 'Can > I monitor > > ATA disks behind SCSI RAID controllers?' at > > http://smartmontools.sourceforge.net/#FAQ. Although the > answer is for > > Linux, it applies to FreeBSD as well. You have to use '-d 3ware,N' > > with every command, where N is the unit #. > > Ex: smartctl -H -A -d 3ware,1 /dev/twed > > > Fs:/disk/karl> smartctl -d 3ware,1 /dev/twed0 smartctl > version 5.32 Copyright (C) 2002-4 Bruce Allen Home page is > http://smartmontools.sourceforge.net/ > > Smartctl open device: /dev/twed0 failed: Inappropriate ioctl > for device > > Nope...apparently not supported on FreeBSD. >
I just tried version 5.33 and it works. You might want to upgrade to 5.33. Also, the 'N' is not the unit #, but the port (drive) #. > -- > -- > Karl Denninger ([EMAIL PROTECTED]) Internet Consultant & > Kids Rights Activist > http://www.denninger.net My home on the net - links to > everything I do! > http://scubaforum.org Your UNCENSORED place to talk > about DIVING! > http://genesis3.blogspot.com Musings Of A Sentient Mind > > > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to > "[EMAIL PROTECTED]" > -------------------------------------------------------- CONFIDENTIALITY NOTICE: This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and contains information that is confidential and proprietary to Applied Micro Circuits Corporation or its subsidiaries. It is to be used solely for the purpose of furthering the parties' business relationship. All unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
