On 9/2/05, Pierre Ulisch <[EMAIL PROTECTED]> wrote: > 2005 9月 2 金曜日 01:47、Antony Mawer さんは書きました: > > On 1/09/2005 11:15 PM, Edwin Brown wrote: > > > This morning I tried to install FreeBSD6.0 under VMWare 5. I got > > > the following message when it was extracting the base into \ > > > directory: > > > > > > Panic: duplicate free of item 0xc1c5a210 from zone 0xc143f000(g_bio) > > > > > > cpuid=0 > > > KDB: enter: panic > > > [thread pid 3 tid 100034 ] > > > stopped at kdb_enter+0x2b: nop > > > db> > > > > > > Is this a known issue? > > > > I've seen it reported before, but I don't recall seeing a solution. I > > hope this is a show-stopper for 6.0, as a number of places I know of use > > VMware for testing and development with FreeBSD... > > I just finished installing FreeBSD6.0-Beta3 under VMWare 5. The installation > completes flawlessly, if you boot from the CD image, then install everything > via FTP instead of using the CD. Installation from CD causes the same panic > you mentioned. I haven't noticed any other problems, X is up and running, > everything I tested so far worked as it should. > I hope this helps a bit :) > > Pierre
For what it's worth I'm running FreeBSD on VMWare 5 back from 5.3, updated to 6.0 Beta 2 recently. As I'm using a real partition, I dual boot FreeBSD either real or under VMware, either with nVidia or VMware drivers. No hickups :) -- Joao Barros _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
