Sorry for cross posting - with 6.0 so near, I wasn't sure which list to
send this too. I'm not subscribed to -current, so please cc me if the
conversation is moved there.
I just cvsup'd RELENG_6_0 and upgraded by 6.0-RC1 install this morning,
eager to see if WPA with ndis0 would now work. The good news: it does.
The bad news: ifconfig doesn't report all the information correctly.
Here is what ifconfig -a is reporting for ndis0:
ndis0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::20f:66ff:fefe:a1a7%ndis0 prefixlen 64 scopeid 0x3
inet 192.168.23.13 netmask 0xffffff00 broadcast 192.168.23.255
ether 00:0f:66:fe:a1:a7
media: IEEE 802.11 Wireless Ethernet autoselect (OFDM/54Mbps)
status: associated
ssid BGP4 channel 1 bssid 00:0f:66:bc:9b:0a
authmode OPEN privacy OFF txpowmax 100 protmode CTS
The problem is that the connection is actually on channel 11, not
channel 1, and its using WPA.
Is this a known issue?
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
