Am 09.11.2005 um 04:55 schrieb Brian Buchanan:
On Tue, 8 Nov 2005, Petr Holub wrote:
I've found the following problem on my IBM T41p when running 6.0-
RELEASE:
when both psm and acpi_ibm are compiled in the kernel, the psm0
device
(touchpad) doesn't initialize properly - with verbose logging it says
psm0: unable to allocate IRQ
When acpi_ibm is removed from the kernel, psm0 works OK.
However, combination of both psm and acpi_ibm used to work at least
till 6.0-BETA4, which is what I had previously on this laptop.
I have the same problem with my IBM T40p. If I load acpi_ibm after
boot, the module loads fine and the mouse continues to work. It
looks like acpi_ibm, if loaded by /boot/loader, takes over irq 12
and prevents psm from attaching.
On a A21m, I've loaded acpi_ibm after boot, and now psm0 appears to
be dead. vmstat -i reports a total of 73 interrupts for irq12, and it
doesn't increase when I push one of the buttons, or move the stick.
Interestingly enough, after rebooting and loading acpi_ibm from
loader.conf, everything seems to be working just fine.
Stefan
--
Stefan Bethke <[EMAIL PROTECTED]> Fon +49 170 346 0140
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"