Marco Calviani wrote:
Hi,
2005/11/30, Bruno Ducrot <[EMAIL PROTECTED]>:
You have to load the cpufreq.ko module at boot.
Adding that line:
cpufreq_load = "YES"
to /boot/loader.conf
should be OK.
I have that line in that position, and it seems working. The point is
that i would like to change the driver and use (AFAIU) a better driver
for my system (est).
In particular i have:
dev.cpu.0.%desc: ACPI CPU
dev.cpu.0.%driver: cpu
dev.cpu.0.%location: handle=\_PR_.CPU0
dev.cpu.0.%pnpinfo: _HID=none _UID=0
dev.cpu.0.%parent: acpi0
Maybe i didn't understood well: but what i have to do to use the Intel
Enhanced SpeedStep driver?
You should send the full output of "sysctl dev.cpu". There is no
cpufreq driver (est, acpi_perf, or other) driver running. Perhaps look
at your dmesg to see if one is probing/attaching.
If you are using acpi and load cpufreq.ko, you've got all the cpufreq
drivers in one package. The right one for your platform will
automatically probe/attach.
powerd need some rework in order to get it working properly. There
is one FreeBSD project on that subject if you are interrested.
Well, thanks i'm very interested, although i'm not at all experienced
in kernel programming....
I'm not inside this issue, but it would not be possible to "emulate"
the behaviour of the ondemand governor? (sorry if this question makes
no sense)
I have no idea what you mean by "on-demand governor". The only
automated control of cpu speed is either by the BIOS (which we can't
control) or the TM/TM2 (and that one is heat-based, not load-based).
--
Nate
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
