hello,
if i use ndis (driver for AR 5212), i can't see any ndis0 interface
driver is net5211.inf, ar5211.sys => ar5211_sys.ko, which should work
with this chipset.
i have compiled kernel with
options NDISAPI
device ndis
and with or without device ath
but still no success
the "wireless key" does not show anything in xev, maybe it is the reason?
what to do with it?
thank you
oh
JoaoBR wrote:
On Friday 30 December 2005 11:18, Ondra Holecek wrote:
in BIOS there is the only option "Wireless default setting" = ENABLED
(but the LED showing the state of wifi is still off)
Hi
in order to get the onboard wireless device to work you need to use the ndis
driver.
Anyway, even so, since 6.0-RC1 if I remember well the LED do not work anymore
even if the device is working fine. This is unfortunatly not very handy since
you never know the reason of connection problems. Still worse is that when
you switch off with the button pressed "off" the device do stay off on next
boot until you press the button again.
You could check with xev the button number and write a small script to catch
it that you are getting an advice/popup when you accidently press the button.
On my NB it is
214 WLbutton off
213 WLbutton on
João
A mensagem foi scaneada pelo sistema de e-mail e pode ser considerada segura.
Service fornecido pelo Datacenter Matik https://datacenter.matik.com.br
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
