Carlos Amengual <[EMAIL PROTECTED]> wrote: > My system is a 6.1-PRERELEASE as of yesterday afternoon, but the same > happened with a RELENG_6 as of a month ago. > > I set up a D-Link AirPlus DWL-520+ wireless PCI adapter in an old > server, and NDISwrapped it (got an AIRPLUS_SYS.ko). > > When running wpa_supplicant -dd -indis0 -Dndis > -c/etc/wpa_supplicant.conf, the system reboots after printing: > > -------------------------------------------------------- > Initializing interface 'ndis0' conf '/etc/wpa_supplicant.conf' driver > 'ndis' Configuration file '/etc/wpa_supplicant.conf' -> > '/etc/wpa_supplicant.conf' Reading configuration file > '/etc/wpa_supplicant.conf' ctrl_interface='/var/run/wpa_supplicant' > ctrl_interface_group=0 (from group name 'wheel') > Line: 6 - start of a new network block > ssid - hexdump_ascii(len=11): > 47 4e 43 57 49 52 45 4c 45 53 53 GNCWIRELESS > scan_ssid=1 (0x1) > key_mgmt: 0x2 > PSK (ASCII passphrase) - hexdump_ascii(len=26): [REMOVED] > PSK (from passphrase) - hexdump(len=32): [REMOVED] > Priority group 0 > id=0 ssid='GNCWIRELESS' > Initializing interface (2) 'ndis0' > EAPOL: SUPP_PAE entering state DISCONNECTED > EAPOL: KEY_RX entering state NO_KEY_RECEIVE > EAPOL: SUPP_BE entering state INITIALIZE > EAP: EAP entering state DISABLED > EAPOL: External notification - portEnabled=0 > EAPOL: External notification - portValid=0 > NDIS: 1 adapter names found > NDIS: 1 adapter descriptions found > NDIS: 0 - ndis0 - ndis0 > NDIS: Adapter description prefix 'ndis0' > ndis_get_oid: oid=0xd010122 len (512) failed > NDIS: verifying driver WPA capability > NDIS: WPA key management supported > NDIS: WPA-PSK key management supported > ndis_set_oid: oid=0xd01011b len (4) failed > NDIS: Failed to set OID_802_11_ENCRYPTION_STATUS (6) > NDIS: TKIP encryption supported > NDIS: driver supports WPA > NDIS: driver capabilities: key_mgmt 0x5 enc 0x4 auth 0x3 > Own MAC address: **:**:**:**:**:** > wpa_driver_ndis_set_wpa: enabled=1 > ndis_get_oid: oid=0xd010101 len (6) failed
> My /etc/wpa_supplicant.conf:
>
> ctrl_interface=/var/run/wpa_supplicant
> ctrl_interface_group=wheel
> #
> # home network; allow all valid ciphers
> network={
> ssid="GNCWIRELESS"
> scan_ssid=1
> key_mgmt=WPA-PSK
> psk="**********************"
> }
Does it make a difference if you additionally put the
bssid in /etc/wpa_supplicant.conf?
Since I upgraded from RELENG_5 to RELENG_6
I have to use both the ssid and the bssid
to get ndis0 to associate.
I only use wep encryption and don't know if a failed
attempt to associate with wpa_supplicant can cause
a reboot, but it's worth a try.
You should also check if you can associate to
the (unencrypted) network with ifconfig by hand.
Fabian
--
http://www.fabiankeil.de/
signature.asc
Description: PGP signature
