On Thursday 09 March 2006 01:19, Sam Leffler wrote: > > Even if it does not help either, I change to boot releng_5 and the card > > works fine and stable on the exactly same hardware > > I'll have to see if I can reproduce this; never seen it. It is very > strange that there are no beacon frames and no traffic is being rx'd or > tx'd. This would seem to indicate interrupts have totally stopped > (athdebug intr should show interrupts at least for the periodic events). > There should be some activitiy and/or error counters should show some > problem. At the very least tx traffic should either fill up the > available hardware tx descriptors (in which case ifconfig would show the > interface marked OACTIVE) or you should get errors. >
I will try again analising on the AP and on a client and try to get it logged can you suggest a tool or method to get what you need? > Presumably you've tried different cards and/or hosts? Does this happen > on all your ap's or just one? > Was my first thought and changed the hardware completly but the powercord ... I should get some other ath cards this days but what should be wrong if it works on 5.4? I have only one 6.0 in test since there were some bridge issues what stopped me upgrading any. The same hardware runs fine on all 5.4 so the problem I get is only on 6.0 or releng_6 João A mensagem foi scaneada pelo sistema de e-mail e pode ser considerada segura. Service fornecido pelo Datacenter Matik https://datacenter.matik.com.br _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
