At 08:14 AM 07/04/2006, Albert Shih wrote:
The 6-stable is installed on the server on begin of February 2006
Problems :
bge0 watchdog timeout problems
bge0 watchdog timeout problems
There have been a number of improvements to the bge driver in late
Feb / early March. I had a busy BIND server that had those errors on
its bge nic which went away by updating to something past March 7th
ie
[tyan-1u]% ident /usr/src/sys/dev/bge/if_bge.c
/usr/src/sys/dev/bge/if_bge.c:
$FreeBSD: src/sys/dev/bge/if_bge.c,v 1.91.2.13 2006/03/04
09:34:48 oleg Exp $
[tyan-1u]%
Again after some days the .... em0 interface don't work. And this
time the message on console is
em0 watchdog timeout problems
Are the interface stats clean ? Take a look at the switch port and
make sure there is not some duplex mismatch or flow control issue.
Now I'm running all interface in polling mode. And...I hope it's
work...(running from 2 days).
If you are hitting livelock then polling will help on the busy
NICS. When in non polling mode, what sort of load avg were you
seeing spent in system
---Mike
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
