Hi! 2006/5/17, Bengt Ahlgren <[EMAIL PROTECTED]>:
Hi! "Dennis Melentyev" <[EMAIL PROTECTED]> writes: > I've got a problem with mounting SonyEricsson K750 flash card: > 6.1 is not stabily mounting/recognizing device, and, after several tries > ended up in creating TWO IDENTICAL device nodes in /dev!!! > > Has anyone any suggestion on how to resolve such a problem? > > Here is kind of my actions log: > After connecting the cable, got this in console: > umass0: Sony Ericsson Sony Ericsson K750, rev 2.00/0.00, addr 2 > da0 at umass-sim0 bus 0 target 0 lun 0 > da0: <Sony Eri Memory Stick 0000> Removable Direct Access SCSI-0 device > da0: 1.000MB/s transfers > da0: 1902MB (3895296 512 byte sectors: 255H 63S/T 242C) > > so far everything is ok, except the reported disk size: it's 1Gb, not 2Gb. I get a different error, but which could possibly be related. I am running 6.1R on a Thinkpad X40. I just thought my connectors have accumulated too much dirt, because after retrying two-three times it succeeds. But perhaps dirt is not the issue, because when it succeeds in reading the size, mounting and reading works perfectly without errors. Here is what I get about 3 times out of 4 when attaching:
[ log skipped]
And, correctly when it succeeds: umass0: Sony Ericsson Sony Ericsson K750, rev 2.00/0.00, addr 2 da0 at umass-sim0 bus 0 target 0 lun 0 da0: <Sony Eri Memory Stick 0000> Removable Direct Access SCSI-0 device da0: 1.000MB/s transfers da0: 61MB (126912 512 byte sectors: 64H 32S/T 61C) I am not sure when the above problems started. When my phone was new (July 2005) it worked without any problems. I was most likely running 5.4 at that time.
It runs perfectly on WinXP. So, connectors should not be an issue. It might be a problem with not-fully-standard things by SE, Also, I tried to play with different FAT types (16/32). FAT16 seemd to be much faster, but also not yet ideal. After I upgraded the phone software yesterday and reformated flash using native phone tools, it helped: da0: <Sony Eri Memory Stick 0000> Removable Direct Access SCSI-0 device da0: 1.000MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present umass0: at uhub2 port 2 (addr 2) disconnected ### first try was not successful, but w/o any other errors in console (da0:umass-sim0:0:0:0): lost device (da0:umass-sim0:0:0:0): removing device entry umass0: detached ### Reattached the device umass0: Sony Ericsson Sony Ericsson K750, rev 2.00/0.00, addr 2 da0 at umass-sim0 bus 0 target 0 lun 0 da0: <Sony Eri Memory Stick 0000> Removable Direct Access SCSI-0 device da0: 1.000MB/s transfers da0: 951MB (1947648 512 byte sectors: 64H 32S/T 951C) ### And yes, it's finally up and correctly sized So, the only FBSD-related issue left is a duplicated entry in /dev listing. Reboot helped, but that's not the way it should be. Could someone check the possibilities to have duplicate entries in directory listing (at least under /dev)? -- Dennis Melentyev
_______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
