On 9/4/06, Morten A. Middelthon <[EMAIL PROTECTED]> wrote:
On Mon, Sep 04, 2006 at 07:47:21AM +0200, Morten A. Middelthon wrote: > On Sat, Sep 02, 2006 at 04:23:21AM -0500, Alex Salazar wrote: > > Apologies for the long message, and thanks in advance for any response. > > > > I've just bought one of those new generation Dell servers, specifically, > > the PowerEdge 1950. > > > > This is a dual Intel Dual Core Xeon 5050, 3.0 GHz, 667MHz FSB, > > 1GB 533MHz RAM, system. > > > > This server has a LSI Logic SAS 5/i integrated adapter and dual embedded > > Broadcom NetXtreme II 5708 Gigabit Ethernet NIC. > <snip> > > Just wanted to say that I'm running FreeBSD/i386 6.1-STABLE on two Dell PE 1950's > without any problems. The only thing I had to do was update the bce driver for > the NIC, but other than that the mfi RAID controller is detected properly, as well > as the SAS disks and RAID array. The only difference I can think of is perhaps > the firmware and BIOS versions >
Hi, Morten. According to your dmesg output, yours are Dell PERC 5/i adapters and doing RAID. This configuration is well supported by mfi driver, AFAIK. mfi0: <Dell PERC 5/i> mem 0xd80f0000-0xd80fffff,0xfc4e0000-0xfc4fffff irq 78 at device 14.0 on pci2 Mine is a LSI Logic SAS 5/i (no RAID) controller, which is supported by the mpt driver, wich seems to need some fixing. mpt0: <LSILogic SAS Adapter> port 0xec00-0xecff mem 0xfc4fc000-0xfc4fffff,0xfc4e0000-0xfc4effff irq 64 at device 8.0 on pci2 -- Alex _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
