I have booted it into FC3 using 2.6.18 kernel. here is the dmesg and
scanpci -v output
tg3.c:v3.65 (August 07, 2006)
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:04:00.0 to 64
eth0: Tigon3 [partno(BCM95754) rev b002 PHY(5787)] (PCI Express)
10/100/1000Base
T Ethernet 00:13:72:25:67:ec
eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1]
TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
pci bus 0x0004 cardnum 0x00 function 0x00: vendor 0x14e4 device 0x167a
Broadcom Corporation Device unknown
CardVendor 0x1028 card 0x01de (Card unknown)
STATUS 0x0010 COMMAND 0x0006
CLASS 0x02 0x00 0x00 REVISION 0x02
BIST 0x00 HEADER 0x00 LATENCY 0x00 CACHE 0x10
BASE0 0x00000000eddf0004 addr 0x00000000eddf0000 MEM 64BIT
MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x01 INT_LINE 0x0a
------------------------------
Kevin Kramer
Sr. Systems Administrator
512.418.5725
Centaur Technology, Inc.
www.centtech.com
Brian A. Seklecki wrote the following on 10/23/06 11:18:
Kevin:
Maybe you can get a punter on linux-poweredge@ lists to do "scanpci
-v" or "lspci" or whatever to get the IDs.
~BAS
On Wed, 18 Oct 2006, Scott Long wrote:
Kevin Kramer wrote:
and will it support the BCM5754 in the Precision 390?
No idea, ask the vendor.
Scott
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to
"[EMAIL PROTECTED]"
l8*
-lava (Brian A. Seklecki - Pittsburgh, PA, USA)
http://www.spiritual-machines.org/
"...from back in the heady days when "helpdesk" meant nothing,
"diskquota"
meant everything, and lives could be bought and sold for a couple of
pages
of laser printout - and frequently were."
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
