понеділок 30 жовтень 2006 23:23, Mikhail Teterin написав: > Ok. I rebooted and restarted the heavy traffic dump (DEVICE_POLLING in > kernel, but without polling actialy enabled). The dump got underway, > although the amount of "sys" load was rather high -- way above 70% > most of the time (on a dual-CPU machine). > > Then I tried to enable polling. The following command worked fine: > > (ifconfig em0 down; sleep 1; ifconfig em0 polling; sleep 1; ifconfig em0 > up) & > > Traffic resumed a couple of second later... > > A minute later, ALL TRAFFIC stopped. The machine is, again, unreachable > via network... > > Conclusion: The only way to have a working em-interface is to compile > with DEVICE_POLLING, but without polling enabled... It is slow (very CPU > intensive), but it seems to work...
FWIW, enabling polling at boot (via rc.conf) does not change anything either... -mi _______________________________________________ freebsd-stable@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"