Jeremy Chadwick wrote:
On Thu, Mar 29, 2007 at 03:19:19PM -0400, Lisa Besko wrote:
We have a new Sunfire X2200 and when I load 6.2 stable on it ipfw will
not load on boot. After the system boots I can do a kldload ipfw and
get it working.
This system is also rebooting every time I plug the ethernet cable into
the bge0 port on the system. The NVE ports don't show up at all.
Any suggestions on what is going on and how to fix it?
Any suggestions would be appreciated, I'm afraid I'm going to have to
run some other OS than FreeBSD on this system if I can't get it working.
First, please do not reply to existing/non-relevant threads to start a
I'll make a note of it.
Second, what are your related /etc/rc.conf entries for ipfw? They
should be named along the lines of firewall_*.
firewall_enabled="YES"
firewall_type="CLIENT"
Thirdly, if you could provide the output from dmesg that's relevant
dmesg info:
bge0: BCM5715 A3, ASIC rev. 0x9003
miibus0: <MII bus> on bge0
brgphy0: BCM5714 10/100/1000baseTX PHY> on mii bus0
pciconf info:
[EMAIL PROTECTED]:4:0 class=0x020000 card=0x534b108e chip=0x167814e4
rev=0xa3 hrd=0x00
vmstat info:
interrupt total rate
irq14:ata0 47 0
irq17:mpt0 1370 1
irq21:ohci0 1 0
irq22:ehci0 1 0
Also, a build time of your kernel + world would be useful too. uname -a
and the timestamp of something like /rescue/ls would suffice for world.
FreeBSD 6.2-STABLE wed March 28 00:55:17 EDT 2007 SMP amd64
The build of world was March 28 20:28
Thanks for taking a look. Let me know if more info is needed.
Lisa Besko
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
