I am trying to set up a HA type system involving two identical boxes and have gone through the following to set up the systems:
Slave server: ggated -R 196608 -S 196608 (exporting /dev/amrd1 ) net.inet.tcp.sendspace: 65536 net.inet.tcp.recvspace: 131072 Master server: ggatec create -u 0 -R 196608 -S 196608 -o rw [slaveip] /dev/amrd1 net.inet.tcp.sendspace: 131072 net.inet.tcp.recvspace: 65536 #gmirror status Name Status Components mirror/gm0 COMPLETE amrd1s1 ggate0s1 the two servers are connected to each other via their 2ndary physical gigE interfaces using cat6 crossover cable. (Netperf shows 890 Mbps at 95% confidence). softupdates are enable on gm0 (though this does not affect the results). The results: /usr/bin/time -h cp testfile64M /data1 28.62s real 0.00s user 0.16s sys and this is very consistent ... about 3 MB/s over repeated runs dd if=/dev/zero of=/data1/testfile32M2 bs=32k count=1024 1024+0 records in 1024+0 records out 33554432 bytes transferred in 16.122641 secs (2081199 bytes/sec) What else can I tune here to make this functional? If I increase recvspace and sendspace much beyond those numbers, ggated will not start claiming to not have enough buffer space. Sven _______________________________________________ firstname.lastname@example.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"