On Thu, 2007-06-14 at 07:35 -0500, [EMAIL PROTECTED] wrote: > Quoting Tom Evans <[EMAIL PROTECTED]>: > > > On Wed, 2007-06-13 at 20:34 +0200, Momchil Ivanov wrote: > >> Hi guys, > >> > >> I am running 6-STABLE as of today and I cannot use the CD-RW on my > >> IBM T40 to > >> burn CDs. When I put atapicam_load="YES" in loader.conf or compile it in > >> the > >> kernel I see the following error > >> acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 > >> 0x00 0x01 > >> and no /dev/cd0 is created. I don`t see the above error without atapicam > >> loaded or in kernel. This is not something new, I haven`t been able to > >> get /dev/cd0 since more than a month following 6-STABLE, don`t know if it > >> ever worked on 6 or 6.x, but I certainly cannot get it to work on 6-STABLE. > >> Any help would be appreciated :) I would be happy ot be able to burn CDs. > >> > >> I have acd0: CDRW <TOSHIBA DVD-ROM SD-R9012/1121> at ata1-master UDMA33 > >> and camcontrol shows: > >> <TOSHIBA DVD-ROM SD-R9012 1121> at scbus2 target 0 lun 0 (pass1) > >> > >> Thanks > >> > > > > The error message is benign - the controller tries to send a command to > > the device, the device doesn't support it, so you get the error message. > > That's all, everything else should work. > > > > Do you load or compile into your kernel > > device scbus > > device cd > > device atapicam > > > > atapicam allows you to access ATAPI devices through the SCSI subsystem, > > so you must ensure that you have a SCSI subsystem to access them > > through. > > > > Cheers > > > > Tom > > Hi Tom, > > I am getting a very similar error with my sony cdrom: > > Jun 14 07:12:36 HOME kernel: acd0: FAILURE - INQUIRY ILLEGAL REQUEST > asc=0x24 ascq=0x00 > Jun 14 07:12:36 HOME kernel: (probe0:ata1:0:1:0): error 22 > Jun 14 07:12:36 HOME kernel: (probe0:ata1:0:1:0): Unretryable Error > Jun 14 07:12:36 HOME kernel: pass0 at ata1 bus 0 target 1 lun 0 > Jun 14 07:12:36 HOME kernel: pass0: <SONY CD-RW CRX230ED 4YS1> > Removable CD-ROM SCSI-0 device > Jun 14 07:12:36 HOME kernel: pass0: 33.000MB/s transfers > Jun 14 07:12:36 HOME kernel: GEOM: new disk cd0 > Jun 14 07:12:36 HOME kernel: (cd0:ata1:0:1:0): error 6 > Jun 14 07:12:36 HOME kernel: (cd0:ata1:0:1:0): Unretryable Error > Jun 14 07:12:36 HOME kernel: cd0 at ata1 bus 0 target 1 lun 0 > Jun 14 07:12:36 HOME kernel: cd0: <SONY CD-RW CRX230ED 4YS1> > Removable CD-ROM SCSI-0 device > Jun 14 07:12:36 HOME kernel: cd0: 33.000MB/s transfers > Jun 14 07:12:36 HOME kernel: cd0: Attempt to query device size failed: > NOT READY, Medium not present > Jun 14 07:12:36 HOME kernel: (cd0:ata1:0:1:0): error 6 > Jun 14 07:12:36 HOME kernel: (cd0:ata1:0:1:0): Unretryable Error > Jun 14 07:12:36 HOME kernel: (cd0:ata1:0:1:0): error 6 > Jun 14 07:12:36 HOME kernel: (cd0:ata1:0:1:0): Unretryable Error > Jun 14 07:12:36 HOME kernel: (cd0:ata1:0:1:0): error 6 > Jun 14 07:12:36 HOME kernel: (cd0:ata1:0:1:0): Unretryable Error > > There was a good cd in the burner when booting. > > the unfortunate part is that in this case, it doesn't seem to be > benign because I can't mount any cd nor can I use burncd or k3b. > > Any suggestions appreciated. IIRC, I can use burncd if I remove scsi support. > > Thanks, > > ed >
Hey ed Those errors look different to what was described (I only get one such error in my dmesg), and different to what the OP reported (he didnt get a cd0). I don't run STABLE, just CURRENT, so I don't know what to suggest. There was a lot of talk about problems burning in k3b on freebsd-stable@ a few months ago, I suggest searching the archives for k3b and see what the resolution was to that. If you haven't already (and don't have a good reason to not), I'd ensure your kernel + userland are up to date, perhaps track RELENG_6 rather than RELENG_6_[12] and see if that helps. Tom
signature.asc
Description: This is a digitally signed message part