On Tue, Jul 31, 2007 at 01:31:59AM +0200, Michael Nottebrock wrote:
 > On Monday, 30. July 2007, Pyun YongHyeon wrote:
 > 
 > > Thanks for reporting. I don't have these hardware models so I couldn't
 > > verify the issue. After reading the vendor's code I've made attached
 > > patch. I don't know whether it works or not, it's just guess work.
 > 
 > Works fine here!
 > 

Since HEAD is in code freeze I guess minimal patch would be more
preferable. Would you try attached patch again?

-- 
Regards,
Pyun YongHyeon
Index: if_re.c
===================================================================
RCS file: /home/ncvs/src/sys/dev/re/if_re.c,v
retrieving revision 1.92
diff -u -r1.92 if_re.c
--- if_re.c     24 Jul 2007 01:24:02 -0000      1.92
+++ if_re.c     31 Jul 2007 00:49:34 -0000
@@ -1300,6 +1300,28 @@
                goto fail;
        }
 
+       /* Take PHY out of power down mode. */
+       if (sc->rl_type == RL_8169) {
+               uint32_t rev;
+
+               rev = CSR_READ_4(sc, RL_TXCFG);
+               /* HWVERID 0, 1 and 2 :  bit26-30, bit23 */
+               rev &= 0x7c800000;
+               if (rev != 0) {
+                       /* RTL8169S single chip */
+                       switch (rev) {
+                       case RL_HWREV_8169_8110SB:
+                       case RL_HWREV_8169_8110SC:
+                       case RL_HWREV_8168_SPIN2:
+                               re_gmii_writereg(dev, 1, 0x1f, 0);
+                               re_gmii_writereg(dev, 1, 0x0e, 0);
+                               break;
+                       default:
+                               break;
+                       }
+               }
+       }
+
        ifp->if_softc = sc;
        if_initname(ifp, device_get_name(dev), device_get_unit(dev));
        ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Reply via email to