re0: discard frame w/o packet header
re0: discard frame w/o packet header
re0: discard frame w/o packet header
re0: discard frame w/o packet header
re0: discard frame w/o packet header
re0: discard frame w/o packet header
re0: discard frame w/o packet header
re0: discard frame w/o packet header
re0: discard frame w/o packet header
re0: discard frame w/o packet header
re0: discard frame w/o packet header
re0: discard frame w/o packet header
re0: discard frame w/o packet header
re0: discard frame w/o packet header
re0: discard frame w/o packet header
re0: discard frame w/o packet header
re0: discard frame w/o packet header
re0: discard frame w/o packet header
ath0: stuck beacon; resetting (bmiss count 4)
ath0: ath_reset: unable to reset hardware; hal status 3
ath0: stuck beacon; resetting (bmiss count 4)
ath0: ath_reset: unable to reset hardware; hal status 3
ath0: device timeout
ath0: stuck beacon; resetting (bmiss count 4)
ath0: ath_reset: unable to reset hardware; hal status 3
ath0: device timeout
ath0: stuck beacon; resetting (bmiss count 4)
ath0: ath_reset: unable to reset hardware; hal status 3
ath0: device timeout
ath0: stuck beacon; resetting (bmiss count 4)
ath0: ath_reset: unable to reset hardware; hal status 3
ath0: stuck beacon; resetting (bmiss count 4)
ath0: ath_reset: unable to reset hardware; hal status 3
ath0: stuck beacon; resetting (bmiss count 4)
ath0: ath_reset: unable to reset hardware; hal status 3
ath0: stuck beacon; resetting (bmiss count 4)
ath0: ath_reset: unable to reset hardware; hal status 3
ath0: stuck beacon; resetting (bmiss count 4)
ath0: ath_reset: unable to reset hardware; hal status 3
ath0: device timeout
ath0: stuck beacon; resetting (bmiss count 4)
ath0: ath_reset: unable to reset hardware; hal status 3
ath0: stuck beacon; resetting (bmiss count 4)
ath0: ath_reset: unable to reset hardware; hal status 3
ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 2290
inet 192.168.200.110 netmask 0xffffff00 broadcast 192.168.200.255
media: IEEE 802.11 Wireless Ethernet autoselect mode 11g <hostap>
status: associated
ssid zaurak_wifi channel 5 (2432 Mhz 11g) bssid
authmode WPA2/802.11i privacy MIXED deftxkey 2 TKIP 2:128-bit
TKIP 3:128-bit txpower 31.5 scanvalid 60 bgscan bgscanintvl 300
bgscanidle 250 roam:rssi11g 7 roam:rate11g 5 pureg protmode CTS wme
burst hidessid -apbridge dtimperiod 1
FreeBSD zaurak.bsdlan.org 7.0-RC1 FreeBSD 7.0-RC1 #1: Wed Jan 2
01:45:03 WET 2008 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/ZAURAK
amd64
[EMAIL PROTECTED]:5:1:0: class=0x020000 card=0x5a001385 chip=0x0013168c
rev=0x01 hdr=0x00
vendor = 'Atheros Communications Inc.'
device = 'AR5212, AR5213 802.11a/b/g Wireless Adapter'
class = network
subclass = ethernet
[EMAIL PROTECTED]:5:4:0: class=0x020000 card=0x820d1043 chip=0x816710ec rev=0x10
hdr=0x00
vendor = 'Realtek Semiconductor'
device = 'RTL8169/8110 Family Gigabit Ethernet NIC'
class = network
subclass = ethernet
ifconfig'ing ath0 up and down continuously will either make it usable
again for a few hours or result in a panic.
Regards,
Hugo
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
