Carlos A. M. dos Santos wrote:
On Feb 6, 2008 5:45 PM, Dominic Fandrey <[EMAIL PROTECTED]> wrote:
Chuck Swiger wrote:
Hi, Dominic--
On Feb 6, 2008, at 11:12 AM, Dominic Fandrey wrote:
behaviour has changed. This is an HP 6510b GR695EA#ABD, if anyone
thinks it might be helpful, I can supply you with a dmesg and the
output of pciconf -lv.
The problem remains with fresh sources:
PID USERNAME THR PRI NICE SIZE RES STATE C TIME CPU COMMAND
12 root 1 171 ki31 0K 16K RUN 0 22:04 97.85%
idle: cpu0
37 root 1 -64 - 0K 16K CPU1 1 2:35 96.00%
irq14: ata0
11 root 1 171 ki31 0K 16K RUN 1 19:32 6.40%
idle: cpu1
The rip is done by k3b, so the drive is accessed through the cam
interface.
What are the values being reported by "sysctl hw.ata"? If you're going
to be burning CD/DVDs, you really want to make sure hw.ata.atapi_dma is on.
I cannot believe it was so trivial. The sysctl looks all right.
# sysctl hw.ata 0 /root
hw.ata.wc: 1
hw.ata.atapi_dma: 1
hw.ata.ata_dma: 1
But further research revealed:
# atacontrol mode acd0 0 /root
current mode = PIO4
# atacontrol mode acd0 udma33 0 /root
changed the load dramatically:
PID USERNAME THR PRI NICE SIZE RES STATE C TIME WCPU COMMAND
12 root 1 171 ki31 0K 16K RUN 0 52:54 100.00% idle: cpu0
11 root 1 171 ki31 0K 16K CPU1 1 23:36 94.29% idle: cpu1
1087 kamikaze 3 -8 0 133M 36168K physrd 1 1:09 3.17% k3b
37 root 1 -64 - 0K 16K WAIT 1 30:10 0.00% irq14: ata0
Thank you very much! I used to think that UDMA33 was the default for
CD-/DVD-Rom drives. I suppose I should review the BIOS settings or change
something in the hints file.
Wow, now I'm *really* surprised. I used to think that putting
hw.ata.ata_dma="1"
hw.ata.atapi_dma="1"
in /boot/loader.conf would be enough to enable DMA mode. In fact I'm
pretty sure it used to be in previous versions of FreeBSD. I created a
/etc/rc.local containing
#!/bin/sh -
atacontrol mode acd0 udma33
Did you check weather you are affected, before you applied your solution?
Only one machine is affected.
I put the following into my rc.conf:
# Set mode for CD/DVD drive.
/sbin/atacontrol mode acd0 2>&1 | /usr/bin/grep PIO > /dev/null 2>&1 \
&& /sbin/atacontrol mode acd0 UDMA33
Two questions, now:
1. Is this related to using atapicam?
Not for me.
2. Should this be considered a bug?
Yes, but not in FreeBSD. It's a bug in the BIOS of my Notebook. This is a
guess, not certainty.
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
