Anyone notice anything strange here? Why ohci (usb) got so huge number of interrupts? Even if I have no usb devices connected to this box.
39.6%Sys 37.9%Intr 0.0%User 0.0%Nice 22.5%Idle # systat -vm Interrupts 101k total 96514 ohci0 ohci ata0 irq14 587 twa0 irq16 em1 irq25 2000 cpu0: time 2000 cpu1: time FreeBSD 7.0-STABLE-200803 #0: Mon Mar 10 18:53:59 UTC 2008 That irq problem was detected originally with ps/2 keyboard without any usb device attached (dmesg info here is taken later). And I tried to use usb flash drive but it was showing up like umass0 storage and was unable to mount it normally (I can use it on 6.2, 6.3 and 7.0 versions just fine though). Maybe something is wrong with freebsd kernel udev implementation- I got twa device (that is 3ware sata raid controller) but my system recognizes this raid as da0 disk.... How can I resolve this problem? By disabling USB in bios? Board is Tyan S3870 http://tyan.com/support_download_bios.aspx?model=B.GT20B3870 Latest motherboard bios and and raid controller firmware applied. On same motherboard FreeBSD-s version 6.2, 6.3 and 7.0 (32 and 64 bit) hang during initial boot- only version that worked is latest stable 7. ------------------------------------------------------------------------------ # dmesg Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.0-STABLE-200803 #0: Mon Mar 10 18:53:59 UTC 2008 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Dual Core AMD Opteron(tm) Processor 270 (1995.01-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x20f12 Stepping = 2 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x1<SSE3> AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!> AMD Features2=0x3<LAHF,CMP> Cores per package: 2 usable memory = 2134601728 (2035 MB) avail memory = 2059890688 (1964 MB) ACPI APIC Table: <A M I OEMAPIC > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 MADT: Forcing active-low polarity and level trigger for SCI ioapic0 <Version 1.1> irqs 0-15 on motherboard ioapic1 <Version 1.1> irqs 16-31 on motherboard ioapic2 <Version 1.1> irqs 32-47 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <A M I OEMXSDT> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: Sleep Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 7ff00000 (3) failed Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0 cpu0: <ACPI CPU> on acpi0 powernow0: <Cool`n'Quiet K8> on cpu0 cpu1: <ACPI CPU> on acpi0 powernow1: <Cool`n'Quiet K8> on cpu1 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 13.0 on pci1 pci2: <ACPI PCI bus> on pcib2 3ware device driver for 9000 series storage controllers, version: 3.70.05.001 twa0: <3ware 9000 series Storage Controller> port 0xcc00-0xcc3f mem 0xf4000000-0xf5ffffff,0xff3ff000-0xff3fffff irq 16 at device 3.0 on pci2 twa0: [ITHREAD] twa0: INFO: (0x15: 0x1300): Controller details:: Model 9550SX-4LP, 4 ports, Firmware FE9X 3.08.00.016, BIOS BE9X 3.08.00.004 atapci0: <ServerWorks HT1000 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 2.1 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] ata1: <ATA channel 1> on atapci0 ata1: [ITHREAD] isab0: <PCI-ISA bridge> at device 2.2 on pci0 isa0: <ISA bus> on isab0 ohci0: <OHCI (generic) USB controller> port 0xe000-0xe0ff mem 0xff6b8000-0xff6b8fff irq 10 at device 3.0 on pci0 ohci0: [GIANT-LOCKED] ohci0: [ITHREAD] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: <(0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0 uhub0: 2 ports with 2 removable, self powered ohci1: <OHCI (generic) USB controller> port 0xe400-0xe4ff mem 0xff6b9000-0xff6b9fff irq 10 at device 3.1 on pci0 ohci1: [GIANT-LOCKED] ohci1: [ITHREAD] usb1: OHCI version 1.0, legacy support usb1: SMM does not respond, resetting usb1: <OHCI (generic) USB controller> on ohci1 usb1: USB revision 1.0 uhub1: <(0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1 uhub1: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> port 0xe800-0xe8ff mem 0xff6ba000-0xff6bafff irq 10 at device 3.2 on pci0 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb2: EHCI version 1.0 usb2: companion controllers, 2 ports each: usb0 usb1 usb2: <EHCI (generic) USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: <(0x1166) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2 uhub2: 4 ports with 4 removable, self powered em0: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port 0xdc00-0xdc3f mem 0xff680000-0xff69ffff,0xff660000-0xff67ffff irq 24 at device 4.0 on pci0 em0: Ethernet address: 00:e0:81:41:3e:5c em0: [FILTER] em1: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port 0xd880-0xd8bf mem 0xff620000-0xff63ffff,0xff600000-0xff61ffff irq 25 at device 5.0 on pci0 em1: Ethernet address: 00:e0:81:41:3e:5d em1: [FILTER] vgapci0: <VGA-compatible display> port 0xec00-0xec7f mem 0xf8000000-0xfbffffff,0xff6c0000-0xff6fffff at device 6.0 on pci0 acpi_button0: <Power Button> on acpi0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A sio1: [FILTER] fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 fdc0: [FILTER] orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc9fff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] ppc0: cannot reserve I/O port range sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 uhub3: <vendor 0x0557 product 0x7000, class 9/0, rev 1.10/1.00, addr 2> on uhub0 uhub3: 4 ports with 4 removable, self powered ukbd0: <ATEN CS-1734A V3.4.331, class 0/0, rev 1.10/1.00, addr 3> on uhub3 kbd2 at ukbd0 ums0: <ATEN CS-1734A V3.4.331, class 0/0, rev 1.10/1.00, addr 3> on uhub3 ums0: 5 buttons and Z dir. Timecounters tick every 1.000 msec acd0: CDROM <CD-224E-N/1.AA> at ata0-slave UDMA33 SMP: AP CPU #1 Launched! da0 at twa0 bus 0 target 0 lun 0 da0: <AMCC 9550SX-4LP DISK 3.08> Fixed Direct Access SCSI-5 device da0: 100.000MB/s transfers da0: 572184MB (1171832832 512 byte sectors: 255H 63S/T 72943C) Trying to mount root from ufs:/dev/da0s1a ------------------------------------------------------------------------------ _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
