On Mon, 2008-05-12 at 14:52 +1000, Ian Smith wrote:
> On Sun, 11 May 2008 [EMAIL PROTECTED] wrote:
>  > Has any work been done recently towards adding SATA Native Command
>  > Queueing as well as ATA APM and acoustic management to FreeBSD?
>  > 
>  > I found this PR (with patch) to add APM and acoustic management control to
>  > atacontrol.  The PR was opened in May 2005 has not been changed since
>  > December 2006 and is still open.
>  > http://www.freebsd.org/cgi/query-pr.cgi?pr=81692&cat=
>  > 
>  > I have not been able to find much of anything on SATA NCQ in FreeBSD newer
>  > than 2005 or 2006 does anyone know anything newer?
> 
> Jeremy has addressed the NCQ issue, about which I know nothing.
> 
> As for APM and AAM, that functionality is handled by sysutils/ataidle,
> which that PR appears - on a quick glance - to pretty well duplicate. 
> 
> I see phk@ recently added an 'atacontrol spindown' command to HEAD and
> RELENG_7 that appears to offer similar functionality to 'ataidle -S
> standby_mins' or 'ataidle -I idle_mins', though specified in seconds
> instead.  However this doesn't address acoustic management.
> 
> Or is ataidle broken for SATA disks?
Does not look broken here (RELENG_7):

RabbitsDen# ataidle /dev/ad4
Device Info:

Model:                  HTS541010G9SA00                         
Serial:                 MP2ZM4X0JWY6WH
Firmware Rev:           MBZIC60H
ATA revision:           ATA-7
LBA 48:                 yes
Geometry:               16383 cyls, 16 heads, 63 spt
Capacity:               93GB
SMART Supported:        yes
SMART Enabled:          yes
APM Supported:          yes
APM Enabled:            yes
AAM Supported:          yes
AAM Enabled:            yes
Current AAM:            1
Vendor Recommends AAM:  1
APM Value:              16638
RabbitsDen# atacontrol list
ATA channel 0:
    Master:      no device present
    Slave:       no device present
ATA channel 1:
    Master:      no device present
    Slave:       no device present
ATA channel 2:
    Master:  ad4 <HTS541010G9SA00/MBZIC60H> Serial ATA v1.0
    Slave:       no device present
ATA channel 3:
    Master:      no device present
    Slave:       no device present
ATA channel 4:
    Master:      no device present
    Slave:       no device present
ATA channel 5:
    Master:      no device present
    Slave:       no device present
atacontrol: ioctl(IOCATADEVICES): Device not configured
RabbitsDen# uname -a
FreeBSD RabbitsDen.RabbitsLawn.verizon.net 7.0-STABLE FreeBSD 7.0-STABLE
#1: Sun May 11 20:31:21 EDT 2008
[EMAIL PROTECTED]:/usr/src/sys/i386/compile/TPX60
i386
RabbitsDen# 

> 
> cheers, Ian
> 
> _______________________________________________
> [email protected] mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "[EMAIL PROTECTED]"
-- 
Alexandre "Sunny" Kovalenko (Олександр Коваленко)

_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Reply via email to