On Wed, 28 May 2008 09:28:23 +0900 Pyun YongHyeon <[EMAIL PROTECTED]> wrote about Re: broken re(4):
PY> > Any hints what I should do next to find the culprit? PY> There were similiar reports on this issue. It seems that it's very PY> hard to make re(4) work so many RTL8168/8169/8111 revisions without PY> documentation as different revisions require different workaround. PY> Anyway, would you try this one? The patch was generated against HEAD PY> but it would apply to STABLE too. PY> http://people.freebsd.org/~yongari/re/re.HEAD.20080519 Well, I tested this one with some success: After booting the patched system, my re0-Interface was working fine, at least I could transmit GBs of data without getting the problems mentioned before. :-) However, on the other hand re1 did not work at all :-(. The interface was up and running, has an IP and everything, but I could not get a single packet from or to it. After trying everything I could think of, I rebooted the machine. Then both interfaces were working again. Therefore, the errors described above when transmitting large amounts of data are back. :-( Somehow the two interfaces seem to interfer with each other. Can I provide further information for fixing this? cu Gerrit _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
