Dear colleagues,
I'm trying to set up new machine with RAID array slightly larger than 2T, so
I'm forced to use gpt.
I did successfully
gpt create
gpt boot
gpt add
newfs
tar base system
gpt show output looks like:
start size index contents
0 1 PMBR
1 1 Pri GPT header
2 32 Pri GPT table
34 128 1 GPT part - FreeBSD boot
162 1048576 2 GPT part - FreeBSD UFS/UFS2
1048738 33554432 3 GPT part - FreeBSD swap
34603170 4359862077 4 GPT part - FreeBSD ZFS
4394465247 32 Sec GPT table
4394465279 1 Sec GPT header
and I hope it boots from da0p2, but it fails:
/boot.config: -Dh -S115200
FreeBSD/i386 boot
Default: 0:ad(0p2)/boot/loader
boot: Consoles: internal video/keyboard serial port
BIOS drive C: is disk0
BIOS 628kB/3405248kB available memory
FreeBSD/i386 bootstrap loader, Revision 1.1
([EMAIL PROTECTED], Wed Feb 20 17:29:26 MSK 2008)
can't load 'kernel'
Type '?' for a list of commands, 'help' for more detailed help.
OK ls
bad path ''
OK show loaddev
disk0s2`:
OK show currdev
disk0s2`:
Quick googling does not help much.
Any hints? Thanks in advance.
Sincerely,
D.Marck [DM5020, MCK-RIPE, DM3-RIPN]
[ FreeBSD committer: [EMAIL PROTECTED] ]
------------------------------------------------------------------------
*** Dmitry Morozovsky --- D.Marck --- Wild Woozle --- [EMAIL PROTECTED] ***
------------------------------------------------------------------------
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
