Hi, I have a PC/box with 5 disks in it that I am using as a fileserver and I recently upgraded some hardware and installed FreeBSD 7.0-RELEASE. Previously I had a RAID PATA IDE controller on the motherboard (was not using RAID functionality though), but I when I upgraded I had to use a PCI IDE controller, due to the lack of PATA ports on the new motherboard. Now when I am attempting to write files, or do anything more than just browse filesystems on the drives ad4-ad7, I get multiple occurrences of the errors below. After these errors occur the kernel panics and I need to perform a hard reset to get the server back up again.
Sep 28 11:40:28 FileServer kernel: ad6: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing request directly Sep 28 11:40:28 FileServer kernel: ad6: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing request directly Sep 28 11:40:28 FileServer kernel: ad6: WARNING - SETFEATURES ENABLE RCACHE taskqueue timeout - completing request directly Sep 28 11:40:28 FileServer kernel: ad6: WARNING - SETFEATURES ENABLE WCACHE taskqueue timeout - completing request directly Sep 28 11:40:28 FileServer kernel: ad6: WARNING - SET_MULTI taskqueue timeout - completing request directly Sep 28 11:40:28 FileServer kernel: ad7: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing request directly Sep 28 11:40:28 FileServer kernel: ad7: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing request directly Sep 28 11:40:28 FileServer kernel: ad7: WARNING - SETFEATURES ENABLE RCACHE taskqueue timeout - completing request directly Sep 28 11:40:28 FileServer kernel: ad7: WARNING - SETFEATURES ENABLE WCACHE taskqueue timeout - completing request directly Sep 28 11:40:28 FileServer kernel: ad7: WARNING - SET_MULTI taskqueue timeout - completing request directly Sep 28 11:40:28 FileServer kernel: ad6: FAILURE - WRITE_DMA timed out LBA=163323135 Sep 28 11:40:28 FileServer kernel: g_vfs_done():ad6s1[WRITE(offset=83621412864, length=16384)]error = 5 <some output omitted> Sep 28 11:40:28 FileServer kernel: ad4: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing request directly Sep 28 11:40:28 FileServer kernel: ad4: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing request directly Sep 28 11:40:28 FileServer kernel: ad4: WARNING - SETFEATURES ENABLE RCACHE taskqueue timeout - completing request directly Sep 28 11:40:28 FileServer kernel: ad4: WARNING - SETFEATURES ENABLE WCACHE taskqueue timeout - completing request directly Sep 28 11:40:28 FileServer kernel: ad4: WARNING - SET_MULTI taskqueue timeout - completing request directly Sep 28 11:40:28 FileServer kernel: ad5: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing request directly Sep 28 11:40:28 FileServer kernel: ad5: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing request directly Sep 28 11:40:28 FileServer kernel: ad5: WARNING - SETFEATURES ENABLE RCACHE taskqueue timeout - completing request directly Sep 28 11:40:28 FileServer kernel: ad5: WARNING - SETFEATURES ENABLE WCACHE taskqueue timeout - completing request directly Sep 28 11:40:28 FileServer kernel: ad5: WARNING - SET_MULTI taskqueue timeout - completing request directly Sep 28 11:40:28 FileServer kernel: ad5: FAILURE - WRITE_DMA timed out LBA=287 I have taken a read through some previous conversations, but I can't seem to find the answers I'm looking for. I've changed the IDE cables and the PATA controller and it is still not making any difference. I also added hw.ata.ata_dma=0 to /boot/loader.conf as recommended in a wiki I came across, but if anything it made the issue even worse. Can someone please help? Thanks, Kristian _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
