-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Michael Butler wrote: > Jeremy Chadwick wrote: > >> On Thu, Oct 30, 2008 at 01:47:48PM -0700, Xin LI wrote: >>> Personally I don't really think ICH7M is capable to do SATA-300. Intel >>> datasheet 307013, page 191 says: >>> >>> Supported Supported >>> 3 Gb/s Transfer Rate >>> (Desktop Only) (Desktop Only) >>> >>> My understanding is that ICH7- *M* does not support SATA-300 at all. >> Xin Li is correct -- the mobile version doesn't do SATA300. > > Then there is a correction required to /sys/dev/ata/ata_chipset.c - mine > identifies itself as: > > [EMAIL PROTECTED]:0:31:2: class=0x010180 card=0xff101179 chip=0x27c48086 > rev=0x02 hdr=0x00 > vendor = 'Intel Corporation' > device = '82801GBM/GHM (ICH7-M Family) Serial ATA Storage > Controller' > class = mass storage > subclass = ATA > > .. where 0x27c4 is "legacy" mode and 0x27c5 is AHCI mode,
Yes. I have actually already submitted a patch to sos@ for review. Please note that 27c4, 27c5 and *27c6* should all be changed, according to the datasheet. Thanks for bringing this to our attention. Cheers, - -- Xin LI <[EMAIL PROTECTED]> http://www.delphij.net/ FreeBSD - The Power to Serve! -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.9 (FreeBSD) iEYEARECAAYFAkkKPkYACgkQi+vbBBjt66CjmwCfYtNzKlcZVEBsbHWTipVLB2rr pwQAoI/JEx27m7Kis4Z/9MeGQOKkRgg0 =10Uz -----END PGP SIGNATURE----- _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-stable To unsubscribe, send any mail to "[EMAIL PROTECTED]"
