Hello everebody.
I have problem with connection of digital camera Pentax Optio S60 to my
workstation. This message is displayed after connection digital camera:
umass0: PENTAX product 0x0047, rev 1.10/0.00, addr 2
umass0: 8070i (ATAPI) over CBI with CCI (using CBI); quirks = 0x0002
umass0:2:0:-1: Attached to scbus2
umass0: CBI reset failed, STALLED
umass0: CBI bulk-in stall clear failed, STALLED
umass0: CBI bulk-out stall clear failed, STALLED
(probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0
(probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
(probe0:umass-sim0:0:0:0): NOT READY asc:3a,0
(probe0:umass-sim0:0:0:0): Medium not present sks:0x80,0xffff
(probe0:umass-sim0:0:0:0): Unretryable error
umass0: at uhub0 port 2 (addr 2) disconnected
umass0: detached
Usual flash-drive work is correct. For example:
umass1: JetFlash TS1GJF2A, rev 2.00/1.00, addr 2
da0 at umass-sim1 bus 1 target 0 lun 0
da0: <JetFlash TS1GJF2A 1.00> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 986MB (2020000 512 byte sectors: 64H 32S/T 986C)
My system:
FreeBSD 5.4-STABLE #19: Mon Dec 12 17:24:27 MSK 2005
My kernel:
machine i386
cpu I686_CPU
ident MYGENERIC
maxusers 0
options NMBCLUSTERS=65536
options NSFBUFS=32768
# To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" # Default places to look for devices.
options SCHED_4BSD # 4BSD scheduler
options INET # InterNETworking
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options UFS_ACL # Support for access control lists
options UFS_DIRHASH # Improve performance on big directories
options MD_ROOT # MD is a potential root device
options NFSCLIENT # Network Filesystem Client
options NFSSERVER # Network Filesystem Server
options NFS_ROOT # NFS usable as /, requires NFSCLIENT
options CD9660 # ISO 9660 Filesystem
options CD9660_ICONV
options NTFS
options NTFS_ICONV
options PROCFS # Process filesystem (requires PSEUDOFS)
options PSEUDOFS # Pseudo-filesystem framework
options COMPAT_43
options COMPAT_FREEBSD4 # Compatible with FreeBSD4
options SCSI_DELAY=15000 # Delay (in ms) before probing SCSI
options KTRACE # ktrace(1) support
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time
extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~215k to driver.
options COMPAT_LINUX
options LINPROCFS
options LIBICONV
options TCP_DROP_SYNFIN
options IPFIREWALL
options IPFIREWALL_DEFAULT_TO_ACCEPT
options IPFIREWALL_FORWARD
options IPFIREWALL_VERBOSE
options IPDIVERT
options DUMMYNET
options SMBFS
options NETSMB
options NETSMBCRYPTO
options LIBMCHAIN
options VESA
options SC_PIXEL_MODE
options MSDOSFS
options MSDOSFS_ICONV
options MSDOSFS_LARGE
options QUOTA
options USB_DEBUG
device apic # I/O APIC
# Bus support. Do not remove isa, even if you have no isa slots
device isa
device eisa
device pci
# Floppy drives
device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device ataraid # ATA RAID drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
options ATA_STATIC_ID # Static device numbering
device atapicam
# SCSI peripherals
device scbus # SCSI bus (required for SCSI)
device ch # SCSI media changers
device da # Direct Access (disks)
device sa # Sequential Access (tape etc)
device pass # Passthrough device (direct SCSI access)
device ses # SCSI Environmental Services (and SAF-TE)
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device vga # VGA video card driver
device sound
device snd_ich
# syscons is the default console driver, resembling an SCO console
device sc
# Floating point support - do not disable.
device npx
# Power management support (see NOTES for more options)
#device apm
device acpi
# Add suspend/resume support for the i8254.
device pmtimer
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
device rl # RealTek 8129/8139
# Pseudo devices.
device loop # Network loopback
device mem # Memory and kernel memory devices
device io # I/O device
device random # Entropy device
device ether # Ethernet support
device sl # Kernel SLIP
device ppp # Kernel PPP
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device faith # IPv6-to-IPv4 relaying (translation)
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device bpf # Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device ehci # EHCI PCI->USB interface (USB 2.0)
device usb # USB Bus (required)
device ugen # Generic
device uhid # "Human Interface Devices"
device umass # Disks/Mass storage - Requires scbus and da
Dmesg:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-STABLE #19: Mon Dec 12 17:24:27 MSK 2005
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/MYGENERIC
ACPI APIC Table: <AMIINT INTEL845>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz (2800.11-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory = 536805376 (511 MB)
avail memory = 515641344 (491 MB)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
netsmb_dev: loaded
acpi0: <AMIINT INTEL845> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
nvidia0: <GeForce3 Ti 200> mem
0xdd980000-0xdd9fffff,0xd8000000-0xdbffffff,0xde000000-0xdeffffff irq 16 at
device 0.0 on pci1
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xd400-0xd41f irq 16 at
device 29.0 on pci0
uhci0: LegSup = 0x2f00
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
usbd_get_string: getting lang failed, using 0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xd800-0xd81f irq 19 at
device 29.1 on pci0
uhci1: LegSup = 0x2f00
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
usbd_get_string: getting lang failed, using 0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xdc00-0xdc1f irq 18 at
device 29.2 on pci0
uhci2: LegSup = 0x2f00
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
usbd_get_string: getting lang failed, using 0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <Intel 82801DB/DBL/DBM (ICH4) USB 2.0 controller> mem
0xdffffc00-0xdfffffff irq 23 at device 29.7 on pci0
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <Intel 82801DB/DBL/DBM (ICH4) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib2
rl0: <RealTek 8139 10/100BaseTX> port 0xbc00-0xbcff mem 0xdfefff00-0xdfefffff
irq 18 at device 2.0 on pci3
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:80:48:23:bc:f7
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xb800-0xb87f mem
0xdfeffe80-0xdfeffeff irq 17 at device 5.0 on pci3
miibus1: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:04:76:9c:b5:0e
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port
0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel ICH4 (82801DB)> port 0xcc00-0xcc3f,0xd000-0xd0ff mem
0xdffff900-0xdffff9ff,0xdffffa00-0xdffffbff irq 17 at device 31.5 on pci0
pcm0: <Avance Logic ALC650 AC97 Codec>
acpi_button1: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
fdc0: <floppy drive controller> port 0x3f7,0x3f4-0x3f5,0x3f2-0x3f3 irq 6 drq 2
on acpi0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2800112752 Hz quality 800
Timecounters tick every 10.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to
accept, logging unlimited
ad0: 286168MB <ST3300831A/3.01> [581421/16/63] at ata0-master UDMA100
acd0: CDRW <TOSHIBA ODD-DVD SD-R1512/1010> at ata1-master UDMA33
acd1: DVDR <NEC DVD RW ND-3500AG/2.16> at ata1-slave UDMA33
pass0 at ata1 bus 0 target 0 lun 0
pass0: <TOSHIBA ODD-DVD SD-R1512 1010> Removable CD-ROM SCSI-0 device
pass0: 33.000MB/s transfers
pass1 at ata1 bus 0 target 1 lun 0
pass1: <_NEC DVD_RW ND-3500AG 2.16> Removable CD-ROM SCSI-0 device
pass1: 33.000MB/s transfers
Mounting root from ufs:/dev/ad0s1a
Please, help me, if it's possible.
Thanks.
--
=======================================================
Demin Alexander / Network Administarator
Group of companies Spectrum / tel. (+7 495) 995-8999
Moscow, 103009, Strastnoy blvr. 8
=======================================================
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
