I'm currently running FreeBSD 6 on an old Intel STL2 motherboard and I've
been unable to get the USB drivers to work properly. The system recognizes
the controller and usb and usb0 show up in /dev, but it cannot see any USB
devices. I tried attaching an optical mouse locally. It lights up
initially, but then it turns off as the USB controller is recognized and
giant locked. I have the same results on the GENERIC kernel as well as all
custom kernels I have built. I've included the dmesg and pciconf pertaining
to the USB controller. Any suggestion on what may be wrong or is there any
further data needed?
dmesg output:
ohci0: <OHCI (generic) USB controller> mem 0xe0026000-0xe0026fff irq
9 at device 15.2 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pciconf output:
[EMAIL PROTECTED]:15:2: class=0x0c0310 card=0x02201166
chip=0x02201166 rev=0x04 hdr=0x00
vendor = 'ServerWorks (Was: Reliance Computer Corp)'
device = 'OSB4 OpenHCI Compliant USB Controller'
class = serial bus
subclass = USB
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
