>
> In message: <[EMAIL PROTECTED]>
> Tuc at T-B-O-H <[EMAIL PROTECTED]> writes:
> : I've got a Soekris NET4801 running with a SanDisk 2G CF card for
> : its main driverunning FreeBSD. The system seems to be doing well, but I'm
> : really hurting on the /usr partition (Its 1.1G) for space. I was
> : contemplating adding a 4G USB pen drive (Something like
> : http://www.memoryx.net/xpe4096.html). Are there any known issues with this?
> : I also need to know what the minimum items I need to configure in the kernel
> : is since I try to run as lean a kernel as possible.
>
> Since /usr is mounted 'late' in the game, there should be no problems
> doing this. Your kernel will need to have the usb device, one of ohci
> and uhci, ehci, umass, scbus and da:
>
> # USB support
> device uhci # UHCI PCI->USB interface
> device ohci # OHCI PCI->USB interface
> device ehci # EHCI PCI->USB interface (USB 2.0)
> device usb # USB Bus (required)
> device umass # Disks/Mass storage - Requires scbus
> and da
>
> device scbus # SCSI bus (required for SCSI)
> device da # Direct Access (disks)
>
Great, thanks....
Is that drive one someone has used and can say works well in FreeBSD?
Thanks, Tuc
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
