В сообщении от 13 июня 2006 18:20 Hans Petter Selasky написал(a): > Hi, > > On Tuesday 13 June 2006 15:37, Василий Петров wrote: > > Do you mean you have tested with umass driver original in 6.0-RELEASE? I > > use this version now. Or it is already reworked some way? > > No.
Unclear. There is 2 questions above. > > > dmesg says nothing special, just one line: > > Jun 13 11:24:14 other kernel: umass0: vendor 0x05e3 USB TO IDE, rev > > 2.00/0.33, addr 2 > > then there are lines from da: > > Jun 13 11:24:14 other kernel: da0 at umass-sim0 bus 0 target 0 lun 0 > > Jun 13 11:24:14 other kernel: da0: <IC25N040 ATMR04-0 0811> Fixed Direct > > Access SCSI-0 device > > Jun 13 11:24:14 other kernel: da0: 40.000MB/s transfers > > Jun 13 11:24:14 other kernel: da0: 38154MB (78140160 512 byte sectors: > > 255H 63S/T 4864C) > > Your device is at least high speed, that is what the 40.000MB/s indicates. But it doesn't work at that speed. > > > So the problem in umass driver? > > Not really, but "umass" can be re-worked for higher performance. > > I hope you can wait some weeks until the work is complete. > Yet I don't understand, must high-speed devices work with bundled FreeBSD drivers and it is my conf problem or this is not supported by them? I haven't found any mentions about it in mailing lists nor PRs. _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "[EMAIL PROTECTED]"
