Hello,
This week I got a HP LaserJet 1022 BW laser printer (USB connection). This
printer is marked as "works perfectly" in LinuxPrinting.org (yes, I know, BSD
differs from Linux).
Well, first, I tried the printer on a friend's box, running Linux. The printer
worked fine (CUPS) with the correct setup (filters, driver).
But, on my FreeBSD box, things didn't went very well. I saw a lot of users
reporting the same problem that I'm having here: the USB port is always busy
when the printer is attached.
The printer is recognized by the system without any problem:
ulpt0: Hewlett-Packard HP LaserJet 1022, rev 2.00/1.00, addr 2, iclass
7/1
ulpt0: using bi-directional mode
A simple test, the same test that were found on previous messages about this
problem:
lptest > /dev/lpt0
/dev/lpt0: Device busy.
Well, I even tried to use a proposed patch to ulpt.c
(http://lists.freebsd.org/pipermail/freebsd-usb/2005-July/001255.html), but no
success.
Any clues/hints?
Many thanks,
Thiago.
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
