Heh, I just made the same mistake. The 0x705a is not the same as the 0x7050. "ural" supports the 0x7050. 0x705a uses a newer chip (the 2573) which is very similiar to the rt2661 for which FreeBSD has cardbus support. I've been debating taking the time to break ural out into two parts (like ral) to support the two different chips.
As far as I can tell documentation is not forthcoming, but the Linux driver contains all the necessary register settings. Alternatively, If someone else wants to work on it, I would be happy to help. -Kip On 1/18/07, Shalom Bhooshi <[EMAIL PROTECTED]> wrote:
Hi there, I've recently purchased a belkin usb 54g adapter (f5d7050) which uses the ralink chipset (ural0 module). The device seems to be detected alright but i am experiencing the same problems as reported by Hannes Hauswedell in this bug report - usb/104352: [ural] ural driver doesnt work - http://www.freebsd.org/cgi/query-pr.cgi?pr=104352&cat=usb. I was wondering if there have been any recent development with regards to this issue or if there are any current workarounds. Many thanks, Shalom Bhooshi PS: Profile $ uname -srim FreeBSD 6.2-RC2 i386 GENERIC $ sudo usbdevs addr 1: UHCI root hub, Intel addr 1: UHCI root hub, Intel addr 1: UHCI root hub, Intel addr 1: EHCI root hub, Intel addr 2: Belkin 54g USB Network Adapter, Belkin $ sudo usbdevs -a 2 -v Controller /dev/usb0: Controller /dev/usb1: Controller /dev/usb2: Controller /dev/usb3: addr 2: high speed, power 300 mA, config 1, Belkin 54g USB Network Adapter(0x705a), Belkin(0x050d), rev 0.01 $ kldstat Id Refs Address Size Name 1 19 0xc0400000 6f64c0 kernel 2 1 0xc0af7000 5fa0 snd_ich.ko 3 2 0xc0afd000 22b88 sound.ko 4 1 0xc0b20000 8680 if_ural.ko 5 1 0xc0b29000 59f20 acpi.ko 6 2 0xc2cec000 9000 ibcs2.ko 7 1 0xc2cf9000 3000 ibcs2_coff.ko 8 1 0xc2d4b000 16000 linux.ko 9 1 0xc3044000 5000 i915.ko 10 1 0xc3049000 e000 drm.ko $ dmesg | egrep -i "usb|ural|ugen|uh" module_register: module uhub/ural already exists! Module uhub/ural failed to register: 17 uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1800-0x181f irq 16 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1820-0x183f irq 19 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1840-0x185f irq 18 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> mem 0xe8080000-0xe80803ff irq 23 at device 29.7 on pci0 usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <Intel 82801DB/L/M (ICH4) USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered ugen0: Belkin Belkin 54g USB Network Adapter, rev 2.00/0.01, addr 2 ugen0: at uhub3 port 4 (addr 2) disconnected All threads purged from ugen0.1 All threads purged from ugen0 ugen0: detached ugen0: Belkin Belkin 54g USB Network Adapter, rev 2.00/0.01, addr 2 _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "[EMAIL PROTECTED]"
_______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "[EMAIL PROTECTED]"
