Hi Joao and everybody: I hacked ubsa as well before posting in this list with no positive result. My system do not detect any serial port. I'm very frustrated with this issue because I can't use the modem in FreeBSD... an Option HSDPA pcmcia doesn't work too... very very disappointed...
Thanks, greetings, Jes On Wed, 14 Feb 2007 16:11:21 +0000 Joao Barros <[EMAIL PROTECTED]> wrote: > Hi all, > > Sorry for my late coment on this, but after getting a new Macbook Pro > I got distracted ;) > In December I was looking into this and (I'm talking out of my head > now) after I patched ubsa with this device IDs I got it to be > detected, although it only connects to one of the two serial devices > present, the modem one I think. From what I recall I was able to > register the device to the network by sending the PIN command through > the modem port but after using a software usb sniffer in windows I > noticed that this command and others (network status maybe) are sent > using the 2nd serial port. > If this is correct, the PIN command can be sent through the normal > dialup script, with a pause before the dialing attempt to let the > device register. Of course after the device is registered this is > unnecessary and time consuming. > I'm thinking of doing a small daemon where you just need to configure > the 2nd serial port and the PIN and it takes cares of registering the > device on the network, monitor network status, signal strength,etc. > The Vodafone OSX driver+App does this, contrary to the "I'm on/off" > Windows App so if anyone knows a USB data software sniffer for OSX I > could get the reverse engineer the commands . > Of course, this will only work if the 2nd serial port gets usable in > FreeBSD. This small app can then be used to drive more 3G cards which > I guess some people would welcome :) > > _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "[EMAIL PROTECTED]"
