Hi everybody
I've finally got my FreeBSD 6.2-release working, and even compiled my own
kernel and everything, so that's good.
However when I connect my USB pen drive and/or USB-IDE external harddrive,
I can only transfer at about 1 MB/s as if they were USB 1.1 devices (and
they're 2.0). This is even more puzzling to me, since when I plug them in
my dmesg says:
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Maxtor 6 Y080L0 0811> Fixed Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: 78167MB (160086528 512 byte sectors: 255H 63S/T 9964C)
da1 at umass-sim1 bus 1 target 0 lun 0
da1: < USB Flash Memory 6.00> Removable Direct Access SCSI-2 device
da1: 40.000MB/s transfers
da1: 489MB (1001472 512 byte sectors: 64H 32S/T 489C)
I also looked at the output from "usbdevs -v":
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000),
nVidia(0x0000), rev 1.00
port 1 powered
port 2 powered
port 3 addr 2: low speed, power 98 mA, config 1, USB-PS/2 Optical
Mouse(0xc025), B16_b_02(0x046d), rev 98.02
port 4 addr 3: full speed, power 50 mA, config 1, Hub in Apple Extended
USB Keyboard(0x1003), Mitsumi Electric(0x05ac), rev 4.10
port 1 powered
port 2 powered
port 3 addr 4: full speed, power 50 mA, config 1, Apple Extended USB
Keyboard(0x020c), Mitsumi Electric(0x05ac), rev 4.10
port 5 powered
port 6 powered
port 7 powered
port 8 powered
port 9 powered
port 10 powered
Controller /dev/usb1:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
nVidia(0x0000), rev 1.00
port 1 powered
port 2 powered
port 3 powered
port 4 powered
port 5 powered
port 6 addr 2: high speed, self powered, config 1, USB TO IDE(0x0702),
vendor 0x05e3(0x05e3), rev 0.33
port 7 powered
port 8 addr 3: high speed, power 100 mA, config 1, USB Flash
Memory(0x6533), vendor 0x0930(0x0930), rev 1.00
port 9 powered
port 10 powered
So the system seems to recognize the devices correctly, but still only
transfers at low speed. I have no problems on other peoples winxp's or
with ubuntu (which unfortunately doesn't recognize my new motherboard's
ACPI-something and crashes at will).
Mighty experts, please help!
-esben
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
