Hans Petter Selasky wrote:
On Tuesday 08 May 2007 23:28, Andrew Muhametshin wrote:
Hello
I have tried to take advantage of new usb-driver
(http://www.turbocat.net/~hselasky/usb4bsd/index.html).
But there were problems -- program (sane) cannot find out the device...
Did you try "kldload uscanner" ?
Then re-plug your scanner and see if it doesn't show up.
--HPS
Yes, thanks, with the module "uscanner", scanner is defined and works.
But too, not without problems.
Each sixth-seventh scanning terminates in failure.
Sometimes, scanning interrupts during process.
And sometimes, lags after moving a scanning CCD-element to initial position.
==================_START ttyv1_====================
# tail -n 0 -f /var/log/messages.log | tee ./hw.usb.debug-04.txt
==================_THE END_======================
*The log-file can be loaded from here:
http://www.dobrohot.org/hw.usb.debug-04.txt.bz2 (28Kb)
or here: http://www.dobrohot.org/hw.usb.debug-04.txt (7.5Mb)
==================_START ttyv2_====================
$ for (( X=1 ; X <= 10 ; X++ )) ; do \
> echo $X ; \
> sleep 3 && scanimage -v -p --quick-format CD --resolution 800
--mode Color > /dev/null ; \
> done
1
scanimage: scanning image of size 3776x3780 pixels at 24 bits/pixel
scanimage: acquiring RGB frame
scanimage: min/max graylevel value = 55/255
scanimage: read 42819840 bytes in total
2
scanimage: scanning image of size 3776x3780 pixels at 24 bits/pixel
...skipping...
7
scanimage: scanning image of size 3776x3780 pixels at 24 bits/pixel
scanimage: acquiring RGB frame
scanimage: min/max graylevel value = 54/255
scanimage: read 42819840 bytes in total
8
scanimage: scanning image of size 3776x3780 pixels at 24 bits/pixel
scanimage: acquiring RGB frame
scanimage: min/max graylevel value = 55/255
scanimage: sane_read: Invalid argument
==================_THE END_======================
And as, some programs do not work with the module uscanner (only with
ugen) for example, "/usr/ports/sysutils/scanbuttond".
With the best regards,
Andrew M.
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
