Hans Petter Selasky wrote: > Hi Ian, > > On Tuesday 26 June 2007 14:03, Ian FREISLICH wrote: > > Hans Petter Selasky wrote: > > > Hi Ian, > > > > > > Debugging Host Controller Halted is not so easy. It usually means that > > > the DMA memory corrupted. > > > > I gathered it's not that easy. The controller that breaks is this one: > > > > [EMAIL PROTECTED]:29:3: class=0x0c0300 card=0x72708086 > > chip=0x27cb8086 > > rev=0x02 hdr=0x00 vendor = 'Intel Corporation' > > device = '82801G (ICH7 Family) USB Universal Host Controller' > > class = serial bus > > subclass = USB > > > > uhci3: <UHCI (generic) USB controller> port 0x4040-0x405f irq 16 at device > > 29.3 on pci0 uhci3: [GIANT-LOCKED] > > uhci3: [ITHREAD] > > uhci3: LegSup = 0x1010 > > usb3: <UHCI (generic) USB controller> on uhci3 > > usb3: USB revision 1.0 > > usbd_get_string: getting lang failed, using 0 > > uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3 > > uhub3: 2 ports with 2 removable, self powered > > > > > Have you tried my new USB stack, popularly called HPS USB stack ? > > > > No, I'm going to try that now. I'm assuming it's: > > http://www.turbocat.net/~hselasky/usb4bsd/ > > Yes, that is correct. > > If you are building with the latest FreeBSD-7 current, then be aware that it > might break. You need to zero at least "/usr/src/sys/dev/usb/umass.c" after > installation. > > In general, just zero out the files that won't compile, if you get any build > errors.
I'm running the latest current. After doing as you suggest, will I still have access to USB mass storage? If not, then this isn't really a workable solution. Ian -- Ian Freislich _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to "[EMAIL PROTECTED]"
