Vlad Skvortsov wrote:
[skipped]
Ok, I have compiled a kernel with ehci in. Here is a snippet of dmesg
output (right after rebooting the box):
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <Maxtor 6 L250R0 BAJ4> Fixed Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: 238475MB (488397168 512 byte sectors: 255H 63S/T 30401C)
umass0: BBB reset failed, TIMEOUT
umass0: BBB reset failed, TIMEOUT
umass0: Invalid CSW: sig 0x4628f8ff should be 0x53425355
(da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi
status == 0x0
Note that it displays high transfer rate this time. I've ran 'diskinfo
-t' to check the actual rate; the seek tests have passed but transfers
hung. 'dd' froze either:
13:31 [EMAIL PROTECTED] ~ > dd if=/dev/da0 of=/dev/null bs=1m count=10
^C
Nothing relevant in /var/log/messages. How can I debug it further?
By googling around it seems that these messages may indicate a hardware
(enclosure) problem. Can someone share what IDE USB 2.0 enclosures are
known to be working OK so that I can rule that possible cause out?
--
Vlad Skvortsov, [EMAIL PROTECTED], http://vss.73rus.com
_______________________________________________
[email protected] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
